Nissan Note I 1 E11 owners manual page 47

text version of content this owner's manual page from owners manual to the vehicle Nissan Note, year of production 2006 - 2012:

puter (where fitted) mode that was displayed beforeOil change schedule set-up CAUTION the ignition switch was turned to the Acc, “OFF” orIt is possible to adjust the interval distance to oil• Theoillevelshouldbecheckedregularly.Op- LOCKposition. change by pressing the Clock setting/Oil change erating with an insufficient oil level can dam- HR16DEorK9Kengineoillevel status schedule setting switch j2 for 3 seconds while the age the engine and such damage is not cov- The Oil level status provides specific informationwrench symbol and the distance to oil change ered by the warranty. regarding the engine oil level. are displayed. The symbol and distance display will• NISSAN recommends checking the oil level start flashing and the display shows the current in- every 5,000 km (3,000 miles). If the oil level is sufficient, “Oil Good” is displayedterval. Press the switch j2 again to increase the for approximately 10 seconds. If the oil level is low,interval distance. Each step increases the intervalDIGITAL CLOCKjA “Oil Lo” blinks for approximately 30 seconds in or-distance by 1,000 km (500 miles). The interval dis-Theclock function at the top of the LCD display j2 der to draw your attention on necessary action. tance can be set up to 63,000 km (31,500 miles) provides a clock display when the ignition switch is after which the display returns to zero. in the ON position. If no further action is made, the display returns to oil12/24 hour setting level status mode and the new interval is set. If the interval distance is set to 0, the display willBrieflypressingtheClocksetting/Oilchangesched- skip the distance to oil change information and ule setting* switch j2 will toggle between the 12 wrench symbol display mode and will directly dis- and 24 hour modes. Note that when the clock dis- play the oil level status (“Oil Good” or “Oil Lo” –plays 0:01 in the 24 hour mode and is changed to HR16DEorK9Kengine equipped models only). In the 12 hour mode, the display will show 12.01 AM. ordertoreturntothedistancetooilchangeinforma- Hour setting NIC1486 tion and wrench symbol display mode, press the Oil level detail examples: Clock setting/Oil change schedule setting switch PressingtheClocksetting/Oilchangescheduleset- G. Oil level 5 (Max) j2 for approximately 3 seconds after the ignition ting switch j2 for 3 seconds or more will initialise switch has been turned to the ON position, and the clock adjustment procedure. H. Oil level 1 (Min) adjust the distance to oil change schedule as previ-The hour setting mode is indicated by the hour dig- A short press on the TRIP button/Steering wheel ously described. it(s), the colon and AM or PM (in the 12 hour mode) switchduringthe“OilGood”or“OilLo”mode SeetheWarrantyInformation&MaintenanceBook- flashing at a certain frequency. Each activation of displays an approximate oil level indication betweenlet for the appropriate interval distance to oil change.the switch j2 changes the time by 1 hour. jG/Max or jH /Min. The display will show AM or PM in the 12 hour In the case of a low engine oil level, see “Engine oil” modeandwillchangeatmiddayandmidnight.Ifthe in the “8. Maintenance and do-it-yourself” section j2 switchisnotpressedfor5secondsormore,the for the proper engine oil refilling procedure. clock changes to minutes setting mode. Instruments and controls 2-5

owners manual Nissan Note

owners manual Nissan Note - year of production: 2006, 2007, 2008, 2009, 2010, 2011, 2012 - Nissan Note I 1 E11 owners manual EN