owners manual Nissan Murano

all ratings: 0 average rating: 5

Black plate (464,1) cal, remove the hitch and/or recei- turning corners. Trailer brakes GUID-21DD387F-EC09-4A2A-95BA-58E6193E64FA ver when not in use. After the hitch Trailer lights If your trailer is equipped with a braking system, is removed, seal the bolt holes to GUID-C0E60E1B-4E97-47ED-94B2-2A921EA2AF95make sure it conforms to federal and/or local prevent exhaust fumes, water or regulations and that it is properly installed. dust from entering the passenger CAUTION compartment. WARNING . Regularly check that all trailer hitch Whensplicingintothevehicleelectrical system, a commercially available mounting bolts are securely Never connect a trailer brake system mounted. power-type module/converter must be used to provide power for all trailer directly to the vehicle brake system. Tire pressures lighting. This unit uses the vehicle GUID-4D579486-C58B-4182-9B69-1D17C2634D39battery as a direct power source for all Pre-towing tips . Whentowingatrailer,inflate the vehicle trailer lights while using the vehicle tail GUID-2726CCBF-1308-4A9A-9EE9-831D4F3E1608 tires to the recommended cold tire light, stoplight and turn signal circuits . Be certain your vehicle maintains a level as a signal source. The module/con- position when a loaded or unloaded trailer is pressure indicated on the Tire and hitched. Do not drive the vehicle if it has an Loading Information label. verter must draw no more than 15 abnormal nose-up or nose-down condition; . Trailer tire condition, size, load rating milliamps from the stop and tail lamp check for improper tongue load, overload, circuits. Using a module/converter that worn suspension or other possible causes and proper inflation pressure should be exceedsthesepowerrequirementsmay in accordance with the trailer and tire damage the vehicle’s electrical system. of either condition. manufacturers’ specifications. See a reputable trailer dealer to obtain . Always secure items in the trailer to prevent the proper equipment and to have it load shift while driving. Safety chains installed. . Keep the cargo load as low as possible in GUID-08592264-67E0-40AD-AD75-EB0AFAF51FBA Always use a suitable chain between your the trailer to keep the trailer center of gravity vehicle and the trailer. The safety chains shouldTrailer lights should comply with federal and/or low. be crossed and should be attached to the hitch, local regulations. For assistance in hooking up . Load the trailer so approximately 60% of the not to the vehicle bumper or axle. The safety trailer lights, contact a NISSAN dealer or trailer load is in the front half and 40% is in chains can be attached to the bumper if the reputable trailer dealer. the back half. Also make sure the load is hitch ball is mounted to the bumper. Be sure to balanced side to side. leave enough slack in the chains to permit 9-22 Technical and consumer information [ Edit: 2011/ 7/ 18Model: Z51-D ]

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders