owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube III 3 owners manual EN

Document: pdf (3.02 MB) 329 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (44,1) 4.The back of the child restraint should be secured against the seatback. If necessary, remove the headrest to obtain the correct child restraint fit. (See “ADJUS- TABLE HEADRESTS” earlier in this sec- tion.) Ifthe headrest is removed, store it in a secure place. Be sure to reinstall the headrest when the child restraint is re- moved. If the seating position does not have a removal headrest and it is interfering with the proper child restraint fit, try another seating position or a different child restraint. SSS0647 SSS0638 Front-facing — step 5 Front-facing — step 7 5.For child restraints that are equipped with7.After attaching the child restraint, test it webbing-mounted attachments, remove anybefore you place the child in it. Push it from additional slack from the anchor attach-side to side while holding the seat near the ments. Press downward and rearward firmlyLATCH attachment path. The child restraint in the center of the child restraint with yourshould not move more than 1 inch (25 mm) knee to compress the vehicle seat cushionfrom side to side. Try to tug it forward and and seatback while tightening the webbingcheck to see if the LATCH attachment holds of the anchor attachments. the restraint in place. If the restraint is not 6.If the child restraint is equipped with a topsecure, tighten the LATCH attachment as tether strap, route the top tether strap andnecessary, or put the restraint in another secure the tether strap to the tether anchorseat and test it again. You may need to try a point. (See “TOP TETHER STRAP CHILDdifferent child restraint. Not all child re- RESTRAINT” earlier in this section.)straints fit in all types of vehicles. 1-30 Safety — Seats, seat belts and supplemental restraint system Model "Z12-D" EDITED: 2009/ 9/ 17

Download PDF

Click here to download a pdf file with an instruction manual for Nissan Cube
year of production from: 2008

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.