or
owners manual Mercedes ML
owners manual Mercedes ML - year of production: 2011, 2012, 2013, 2014, 2015 - Mercedes Benz ML Class W166 owners manual EN
Document:
pdf (6.54 MB) 458 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Mercedes ML, year of production 2011 - 2015:
Service products and fillingc apacities
450
Use only SAE 0W-40 or SAE 5W-40 engine oils Select an engine oil with an SAE (viscosity)
for AMG vehicles. classification suitable for the prevailing
outside temperatures. The table shows you
i
MB approval is indicated on the oil
which SAE classifications are to be used. The
containers.
low-temperature characteristics of engine
oils can deteriorate significantly, e.g. as a
Filling capacities
result of aging, soot and fuel deposits. It is
therefore strongly recommended that you
The following values refer to an oil change
carry out regularo il changes using an
including the oil filter.
approved engine oil with the appropriate SAE
Model Capacity
classification.
ML 350 7.4 US qt (7.0 l)
BlueEFFICIENCY
Brake fluid
ML 350 4MATIC
BlueEFFICIENCY
G WARNING
The brake fluid constantly absorbs moisture
ML 550 4MATIC 9.0 US qt (8.5 l)
fro mt he air. This lowers the boiling point of
BlueEFFICIENCY
the brake fluid. If the boiling point of the brake
ML 63 AMG Without external oil
fluid is too low, vapor pockets may form in the
cooler: 9.0 US qt
brake system when the brakes are applied
(8.5 l)
hard. This would impair braking efficiency.
There is a risk of an accident.
ML 350 BlueTEC 4 8.5 US qt (8.0 l)
You should have the brake fluid renewed at
MATIC
the specified intervals.
Additives
Comply with the important safety notes for
service products when handling brake fluid
!
Do not use any additives in the engine oil.
(Y page 444).
This could damage the engine.
The brake fluid change intervals can be found
data
cal
hni
Tec
in the Maintenance Booklet.
Engine oil viscosity
Only use brake fluid approved by Mercedes-
Benz according to MB Approval 331.0.
Information about approved brake fluid can
be obtained at any qualified specialist
workshop or on the Internet at
http://bevo.mercedes-benz.com.
i
Have the brake fluid regularly replaced at
a qualified specialist workshop and have
this confirmed in the Maintenance Booklet.
Viscosity describes the flow characteristics
of a fluid. If an engine oil has a high viscosity,
this means that it is thick; a low viscosity
means that it is thin.
Download PDF
Click here to download a pdf file with an instruction manual for Mercedes ML
year of production from: 2011
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Mercedes Benz ML Class W166 owners manual
pages 449 - 455
Mercedes Benz ML Class W166 owners manual
page 452 / 458
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF