owners manual Mercedes CL

owners manual Mercedes CL - year of production: 2006 - Mercedes Benz CL C216 2014 owners manual EN

Document: pdf (14.21 MB) 494 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mercedes CL, year of production 2006:

Towing and tow-starting 448 X Press the mark on cover : inwards in the vehicle .A dapt your style of driving direction of the arrow. accordingly. X Take cover : off the opening. The automatic transmission automatically X Screw the towing eye in clockwise to the shifts to position P when you open the driver's stop and tighten it. or front-passenger door or when you remove the SmartKey from the ignition lock. In order to ensure that the automatic transmission Removing the towing eye stays in position N when towing the vehicle, X Loosen the towing eye and unscrew it. you must observe the following points: X Attach cover : to the bumper and press X Make sure that the vehicle is stationary and until it engages. the SmartKey in the ignition lock is in X Place the towing eye in the vehicle tool kit. position 0. X Turn the SmartKey to position 2 in the ignition lock. Towing the vehicle with the rear axle On vehicles with KEYLESS-GO, use the key raised instead of the Start/Stop button (Y page 273). Only possible on vehicles without 4MATIC. X Depress and hold the brake pedal. X When towing your vehicle with the rear axle Shift the automatic transmission to raised, it is importan tt hat you observe the position N. safety instructions (Y page 446). X Release the brake pedal. X Release the electric parking brake. ! The ignition must be switched off if you are towing the vehicle with the rear axle X Switch on the hazard warning lamps ® raised. Intervention by ESP could (Y page 253). nce otherwise damage the brake system. assista X Leave the SmartKey in position 2 in the own Breakd ignition lock. X Switch on the hazard warning lamps (Y page 253). i When towing with the hazard warning lamps switched on, use the combination X Turn the SmartKey to position 0 in the switch as usual to signal a change of ignition lock and remove the SmartKey direction. In this case, only the turn signals from the ignition lock. for the desired direction flash. When the X When leaving the vehicle, take the combination switch is reset, the hazard SmartKey or the KEYLESS-GO key with you. warning lamps start flashing again. Towing av ehicle with both axles on Transporting the vehicle the ground The towing eye can be used to pull the vehicle When having your vehicle towed, observe the onto a trailer or transporter for transporting important safety notes (Y page 446). purposes. WARNING G X Turn the SmartKey to position 2 in the The power assistance for the steering and the ignition lock. brake force booster do not work when the X Shift the automatic transmission to engine is not running. You will then need position N. much more effort to brake and steer the

Download PDF

Click here to download a pdf file with an instruction manual for Mercedes CL
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.