Chevrolet Silverado III 3 owners manual page 444

text version of content this owner's manual page from owners manual to the vehicle Chevrolet Silverado, year of production 2013:

Chevrolet 2015i Silverado Owner Manual (GMNA-Localizing-U.S./Canada/ Black plate (67,1) Mexico-8425172) - 2015 - CRC - 6/20/14 Vehicle Care 10-67 light and the DIC message . Replacement tires or wheels do should be performed after replacing should go off after the road tire not match the original equipment a spare tire with a road tire is replaced and the sensor tires or wheels. Tires and wheels containing the TPMS sensor. The matching process is performed other than those recommended malfunction light and the DIC successfully. See "TPMS Sensor could prevent the TPMS from messageshould go off at the next Matching Process" later in this functioning properly. SeeBuying ignition cycle. The sensors are section. NewTires on page 10-73. matched to the tire/wheel positions, . The TPMSsensormatching . Operating electronic devices or using a TPMS relearn tool, in the process was not done or not being near facilities using radio following order: driver side front tire, completed successfully after wavefrequencies similar to the passenger side front tire, passenger rotating the tires. The TPMScouldcausetheTPMS side rear tire, and driver side rear. malfunction light and the DIC sensors to malfunction. Seeyour dealer for service or to messageshould go off after If the TPMS is not functioning purchase a relearn tool. ATPMS successfully completing the properly, it cannot detect or signal arelearn tool can also be purchased. sensor matching process. See low tire condition. See your dealer SeeTire Pressure Monitor "TPMSSensorMatching for service if the TPMS malfunction Sensor Activation Tool at Process" later in this section. light and DIC message come on www.gmtoolsandequipment.comor . and stay on. call 1-800-GM TOOLS OneormoreTPMSsensorsare (1-800-468-6657). missing or damaged. The TPMSSensorMatching There are two minutes to match the malfunction light and the DIC Process first tire/wheel position, and messageshould go off when the five minutes overall to match all four TPMSsensorsareinstalled and Each TPMSsensorhasaunique tire/wheel positions. If it takes the sensor matching process is identification code. The identification performed successfully. See code needs to be matched to a new longer, the matching process stops your dealer for service. tire/wheel position after rotating theand must be restarted. vehicle’s tires or replacing one or more of the TPMS sensors. Also, the TPMS sensor matching process

owners manual Chevrolet Silverado

owners manual Chevrolet Silverado - year of production: 2013 - Chevrolet Silverado III 3 owners manual EN