BMW 7 E65 owners manual page 44

text version of content this owner's manual page from owners manual to the vehicle BMW 7 E65, year of production 2001 - 2008:

Lock, i.e. arm by pressing twice; press > Press the switch beyond the pressure button 2 of the remote control point: twice in succession, refer to page 36, or The window moves downward auto- lock twice with the key, refer to page 37. matically. Press the switch again to The indicator lamp lights up briefly and stop the opening movement. then flashes continuously. The tilt alarm You can close the windows in the same sensor and the interior motion sensor are manner by pulling the switch. switched off as long as the system is The electric power windows remain avail- armed. able for use after the ignition is switched If you desire, the off: > tilt alarm sensor > For approx. 15 minutes with the remote control unit in the radio mode > interior motion sensor > For approx. 1 minute in position 0 or can be switched off permanently. Please with the remote control unit disen- contact your BMW center for assistance.< gaged. Interior motion sensor To open, press the switch beyond the pres- sure point. Opening and closingIn order for the interior motion sensor to function properly, the windows and sliding/ When leaving the vehicle parked, tilt sunroof must be completely closed. always remove the remote control from the ignition lock and close the doors; Be sure to deactivate the interior motion this precaution prevents children from sensor, refer to section on Avoiding unin- operating the power windows and injuring tentional alarms, when you wish to leave themselves, etc.< the windows or sliding/tilt sunroof open. For information on using the convenience operation mode at the door lock or with the Electric power windows remote control unit, refer to page 36 or 37. Safety feature Opening and closing windows If the force rises beyond a predefined threshold during closing, the system will immediately stop moving the window prior to lowering it slightly. Despite this safety feature you should always inspect the window's travel path prior to closing it, as the safety system might fail to detect certain kinds of obstruc- tions, such as very thin objects, and the window would continue closing. Pulling the switch beyond the pressure From radio mode on: point and holding it limits the response of > Press the switch until you feel resis- the safety feature. Under these conditions tance: the window will respond to forces beyond a The window continues to move down- defined threshold by only opening several ward as long as you continue to hold millimeters. the switch If you again pull the switch past the pres- sure point and hold it in position within a period of roughly 4 seconds, the safety fea- ture will be deactivated.< 42 Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG

owners manual BMW 7 E65

owners manual BMW 7 E65 - year of production: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 - BMW 7 E65 owners manual EN