owners manual Nissan Murano

all ratings: 0 average rating: 5

Black plate (438,1) match the potential maximum vehicle speed. . ONLY use spare tires specified for chain must be secured or removed to prevent Never exceed the maximum speed rating of the the AWD model. the possibility of whipping action damage to the tire. fenders or underbody. If possible, avoid fully If you install snow tires, they must be the same Ifexcessive tire wear is found, it is recom- loading your vehicle when using tire chains. In size, brand, construction and tread pattern on allmended that all four tires be replaced with tires addition, drive at a reduced speed. Otherwise, four wheels. of the same size, brand, construction and tread your vehicle may be damaged and/or vehicle For additional traction on icy roads, studded pattern. The tire pressure and wheel alignment handling and performance may be adversely tires may be used. However, some U.S. states should also be checked and corrected as affected. and Canadian provinces prohibit their use. necessary. Contact a NISSAN dealer. Tire chains must be installed only on the Check local, state and provincial laws before TIRE CHAINS front wheels and not on the rear wheels. installing studded tires. Skid and traction cap- GUID-6204202C-317D-4765-A1B1-D1D79486BCE6Never install tire chains on a TEMPORARY USE abilities of studded snow tires, on wet or dry Use of tire chains may be prohibited according ONLY spare tire. surfaces, may be poorer than that of non- to location. Check the local laws before instal- ling tire chains. When installing tire chains, makeDonotusetire chains on dry roads. Driving with studded snow tires. sure they are the proper size for the tires on yourtire chains in such conditions can cause damage All-Wheel Drive (AWD) models vehicle and are installed according to the chain to the various mechanisms of the vehicle due to GUID-BFBB743C-16B6-4459-BD0B-1E087CE52CCBmanufacturer’s suggestions.Use only SAE some overstress. CAUTION Class S chains. Class “S” chains are used on vehicles with restricted tire to vehicle clearance. Vehicles that can use Class “S” chains are . Always use tires of the same type, designed to meet the SAE standard minimum size, brand, construction (bias, bias- clearances between the tire and the closest belted or radial), and tread pattern vehicle suspension or body component required on all four wheels. Failure to do so to accommodate the use of a winter traction mayresult in a circumference differ- device (tire chains or cables). The minimum ence between tires on the front and clearances are determined using the factory rear axles which will cause exces- equipped tire size. Other types may damage sive tire wear and may damage the your vehicle. Use chain tensioners when re- transmission, transfer case and dif- commended by the tire chain manufacturer to ferential gears. ensure a tight fit. Loose end links of the tire 8-38 Maintenance and do-it-yourself [ Edit: 2011/ 7/ 18Model: Z51-D ]

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders