Hummer H2 owners manual page 432

text version of content this owner's manual page from owners manual to the vehicle Hummer H2, year of production 2002 - 2010:

(c) Visually inspect hoses and have them replaced if theySUTspare tire carrier hinge: Inspect for leaks and are cracked, swollen or deteriorated. Inspect all pipes,lubricate if required. Remove the setscrew at the hinge ﬁttings and clamps; replace with genuine GM parts ascasting and add lubricant, moving the hinge back needed.Tohelpensureproperoperation,apressuretestand forth periodically, until lubricant can be seen coming of the cooling system and pressure cap and cleaning thefrom the setscrew opening. Install setscrew and outside of the radiator and air conditioning condenser istighten to 7 ft lb (9 Y). See Recommended ﬂuids and recommendedatleastonceayear.Lubricants on page 6-12 for what lubricant to use. (d) Visually inspect wiper blades for wear or cracking.(g) Check vent hose at transfer case for kinks and Replace blade inserts that appear worn or damagedproper installation. or that streak or miss areas of the windshield.(h) Change automatic transmission ﬂuid and ﬁlter if the (e) Make sure the safety belt reminder light and all yourvehicle is mainly driven under one or more of these belts, buckles, latch plates, retractors and anchoragesconditions: are working properly. Look for any other loose or− In heavy city traffic where the outside temperature damaged safety belt system parts. If you see anythingregularly reaches 90°F (32°C) or higher. that might keep a safety belt system from doing its− In hilly or mountainous terrain. job, have it repaired. Have any torn or frayed safety belts− When doing frequent trailer towing. replaced. Also look for any opened or broken air bag coverings, and have them repaired or replaced. (The air− Uses such as found in taxi, police or delivery bag system does not need regular maintenance.)service. (f) Lubricate all key lock cylinders, hood latch assembly,(i) Drain, ﬂush and reﬁll cooling system. See Engine secondary latch, pivots, spring anchor, release pawl,Coolant on page 5-24 for what to use. Inspect hoses. rear compartment hinges, outer liftgate handle pivotClean radiator, condenser, pressure cap and ﬁller neck. points, rear door detent link, roller mechanism, liftgatePressure test the cooling system and pressure cap. handle pivot points, latch bolt, fuel door hinge, cargo(j) A ﬂuid loss in any vehicle system could indicate a door hinge, locks and folding seat hardware. Moreproblem. Have the system inspected and repaired and frequent lubrication may be required when exposed to athe ﬂuid level checked. Add ﬂuid if needed. corrosive environment. Applying silicone grease on weatherstrips with a clean cloth will make them last longer, seal better and not stick or squeak. 6-8

owners manual Hummer H2

owners manual Hummer H2 - year of production: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 - Hummer H2 owners manual EN