owners manual Mercedes CL

owners manual Mercedes CL - year of production: 2006 - Mercedes Benz CL C216 2014 owners manual EN

Document: pdf (14.21 MB) 494 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mercedes CL, year of production 2006:

Care 429 R trim to painted surfaces. You could otherwise damage the paintwork. R ventilatio ns lots Damaged seals or electrical components If water no longer forms "beads" on the paint can lead to leaks or failures. surface, use the paint care products recommended and approved by Mercedes- Benz.T his is the case approximately every Cleaning the wheels three to five months, depending on the ! Do not use acidic wheel cleaning products climate conditions and the care product used. to remove brake dust. This could damage If the dirt has penetrated the paint surface or wheel bolts and brake components. if the paintwork has become dull, then the ! Do not park the vehicle for an extended paintwork should be cleaned. For cleaning, period straight after cleaning it, particularly please use the paint cleaner recommend and after having cleaned the wheels with wheel approved by Mercedes Benz. cleaner. Wheel cleaners could cause Do not use these care products in the sun or increased corrosio noft he brake discs and on the hood while the hood is hot. brake pads/linings. For this reason, you X Use a suitable touch-up stick, e.g. MB should drive for a few minutes after Touch-Up Stick, to repair slight damage to cleaning. Braking heats the brake discs and the paintwork quickly and provisionally. the brake pads/linings, thus drying them. The vehicle can then be parked. Matte finish care Cleaning the paintwork If your vehicle has a clear matte finish, observe the following instructions in order to Scratches, corrosive deposits, areas affected avoid damage to the paintwork due to care by corrosion and damage caused by and Maintenance incorrect care. inadequate care cannot always be completely These notes also apply to light alloy wheels repaired. In such cases, visit a qualified with a clear matte finish. specialist workshop. X Remove dirt immediately, where possible, ! Never polish the vehicle or the light alloy while avoiding rubbing too hard. wheels. Polishing causes the finish to X shine. Soak insect remains with insect remover and rinse off the treated areas afterwards. ! The following may cause the paint to X Soak bird droppings with water and rinse become shiny and thus reduce the matte off the treated areas afterwards. effect: X Remove coolant, brake fluid, tree resin, R Vigorous rubbing with unsuitable oils, fuels and greases by rubbing gently materials. with a cloth soaked in petroleum ether or R Frequent use of car washes. lighter fluid. R Washing the vehicle in direct sunlight. X Use tar remover to remove tar stains. ! X Never use paint cleaner, buffing or Use silicone remover to remove wax. polishing products, or gloss preserver, e.g. ! Do not affix: wax. These products are only suitable for R high-gloss surfaces. Their use on vehicles stickers with matte finish leads to considerable R films surface damage (shiny, spotted areas). R magnetic plates or similar items Z

Download PDF

Click here to download a pdf file with an instruction manual for Mercedes CL
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.