owners manual Mercedes S

all ratings: 0 average rating: 5

426 Service products and filling capacities Missing values were not available at time ofSAEclassifications are to be used. The low- going to print. temperature characteristics of engine oils can deteriorate significantly, e.g. as a result Model Engine MB ofaging,sootandfueldeposits.Itistherefore model Approval strongly recommended that you carry out regular oil changes using an approved engine AMGvehicles 157 229.5 oil with the appropriate SAE classification. All other models278229.5 Brakefluid iMBapprovalisindicatedontheoil containers. GWARNING Overaperiodoftime,thebrakefluidabsorbs Filling capacities moisture from the air; this lowers its boiling The following values refer to an oil changepoint. including the oil filter. If the boiling point of the brakefluidistoolow, vapor pockets may form in the brake system Model Capacity whenthebrakesareapplied hard (e.g. when AMGvehicles Without external oildriving downhill). This would impair braking cooler: 9.0 US qtefficiency. (8.5 l) Youshould have the brake fluid renewed at regular intervals. The brake fluid change All other models8.5 qt (8.0 l) intervals can be found in the Maintenance Booklet. Additives data Only use brake fluid approved by Mercedes- !Donotuseanyadditivesintheengineoil. Benz according to MB Approval 331.0. This could damage the engine. Information about approved brake fluid can be obtained at any qualified specialist Engine oil viscosity workshop or on the Internet at Technical http://bevo.mercedes-benz.com. iHavethebrakefluidrenewedregularlyat a qualified specialist workshop. Coolant Important safety notes GWARNING If antifreeze comes into contact with hot Viscosity describes the flow characteristics components in the engine compartment, it of a fluid. If an engine oil has a high viscosity, mayignite. There is a risk of fire and injury. this means that it is thick; a low viscosity Let the engine cool down before you add meansthatit is thin. antifreeze. Make sure that antifreeze is not SelectanengineoilwithanSAEclassification spilled next to the filler neck. Thoroughly (viscosity) suitable for the prevailing outside temperatures. The table shows you which

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders