owners manual Volvo XC40

all ratings: 0 average rating: 5

STARTING AND DRIVING Conditions for the Start/Stop The starter battery€s temperature is below or The engine auto-starts without the • function above the permitted limit values. brake pedal having been released For the Start/Stop function to work requires that The driver makes sweeping steering wheel In the following cases, the engine auto-starts • a number of conditions are met. movements. even if the driver does not take his/her foot off The road is very steep. the brake pedal: If any condition is not met, this will be indicated in• High humidity in the passenger compartment the driver display. The bonnet is opened. • • forms misting on the windows. When driving at high altitudes when the The engine does not auto-stop • The environment in the passenger compart- The engine does not auto-stop in the following engine has not reached operating tempera- • ture. ment deviates from the set values. cases: There is a temporarily high current take-off The ABS system has been activated. • The car has not reached approx. 10 km/h • or starter battery capacity drops below the • In the event of heavy braking (even without (6 mph) after starting. • lowest permissible level. After a number of repeated auto stops, the ABS system having been activated). Repeated pumping of the brake pedal. • Many starts during a short period of time • speed must again exceed approx. 10 km/h • The bonnet is opened. (6 mph) before the next auto stop. have activated the starter motor€s thermal • protection. The car starts to roll or increase speed The driver has unfastened the seatbelt. • • The exhaust system€s particulate filter is full5. slightly if the car auto-stopped without being The capacity of the starter battery is below • completely stationary. • A trailer is connected electrically to the car’s the minimum permissible level. • The driver€s seatbelt buckle is opened with electrical system. • The engine is not at normal operating tem- the gear selector in D or N position. • The gearbox is not at normal operating tem- perature. • The gear selector is moved from D to R or M perature. • The ambient temperature is under -5 °C (23 (±) position. • The gear selector is in M (±) position. °F) or above approx. 37 °C (98 °F). • The driver€s door is opened with the gear • the windscreen€s electric heating is activated. selector in D position - a "ping" sound and • The engine does not auto-start The environment in the passenger compart- In the following cases the engine does not auto- text message indicate that the ignition is on. • ment deviates from the set values. start after having auto-stopped: the car is reversed. The driver is unbelted, the gear selector is in • • P position and the driver€s door is open - a normal start must take place. 5 Applies to cars with diesel engines. }} 421

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders