owners manual Toyota Auris Hybrid

all ratings: 0 average rating: 5

UK AURIS_HV_HB_OM_EE_OM12J68E.book 422 ページ 㧞㧜㧝５年㧞月㧞㧟日　月曜日　午後㧝㧜時㧟８分 422 7-3. Do-it-yourself maintenance ■The initialization operation (vehicles with a tire pressure warning sys- tem) ●Make sure to carry out initialization after adjusting the tire inflation pressure. Also, make sure the tires are cold before carrying out initialization or tire inflation pressure adjustment. ●If you have accidentally turned the power switch off during initialization, it is not necessary to press the reset switch again as initialization will restart automatically when the power switch has been turned to ON mode for the next time. ●If you accidentally press the reset switch when initialization is not necessary, adjust the tire inflation pressure to the specified level when the tires are cold, and conduct initialization again. ■Warning performance of the tire pressure warning system (vehicles with a tire pressure warning system) The warning of the tire pressure warning system will change in accordance with driving conditions. For this reason, the system may give a warning even if the tire pressure does not reach a low enough level, or if the pressure is higher than the pressure that was adjusted to when the system was initial- ized. ■When initialization of the tire pressure warning system has failed (vehi- cles with a tire pressure warning system) Initialization can be completed in a few minutes. However, in the following cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as pos- sible. ●When operating the tire pressure warning reset switch, the tire pressure warning light does not blink 3 times. ●After driving for a certain period of time since the initialization has been completed, the warning light comes on after blinking for 1 minute. ■Registering ID codes (vehicles with a tire pressure warning system) The ID codes of the tire pressure warning valve and transmitters for two sets of wheels can be registered. It is not necessary to register the ID codes when replacing normal tires with snow tires, if the ID codes for the wheels of both normal tires and snow tires are registered beforehand. For information about changing ID codes, ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. UK AURIS_HV_HB_EE (OM12J68E)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders