owners manual Lexus GS

all ratings: 0 average rating: 5

418 6-3. Do-it-yourself maintenance ■Situations in which the tire pressure warning system may not operate properly ●In the following cases, the tire pressure warning system may not operate properly. • If non-genuine Lexus wheels are used. • A tire has been replaced with a tire that is not an OE (Original Equipment) tire. • A tire has been replaced with a tire that is not of the specified size. • Tire chains etc. are equipped. • An auxiliary-supported run-flat tire is equipped. • If a window tint that affects the radio wave signals is installed. • If there is a lot of snow or ice on the vehicle, particularly around the wheels or wheel housings. • If the tire inflation pressure is extremely higher than the specified level. • If wheel without the tire pressure warning valve and transmitter are used. • If the ID code on the tire pressure warning valves and transmitters is not registered in the tire pressure warning computer. ●Performance may be affected in the following situations. • Near a TV tower, electric power plant, gas station, radio station, large display, air- port or other facility that generates strong radio waves or electrical noise • When carrying a portable radio, cellular phone, cordless phone or other wireless communication device If tire position information is not correctly displayed due to the radio wave conditions, the display may be corrected by driving and changing the radio wave conditions. ●When the vehicle is parked, the time taken for the warning to start or go off could be extended. ●When tire inflation pressure declines rapidly for example when a tire has burst, the warning may not function. ■The initialization operation ●Make sure to carry out initialization after adjusting the tire inflation pressure. Also, make sure the tires are cold before carrying out initialization or tire inflation pres- sure adjustment. ●If you have accidentally turned the engine switch off during initialization, it is not neces- sary to manually restart the initialization again, as initialization will restart automatically the next time the engine switch is turned to IGNITION ON mode. ●If you accidentally perform initialization when initialization is not necessary, adjust the tire inflation pressure to the specified lel whveen the tires are cold, and conduct initial- ization again. ■When initialization of the tire pressure warning system has failed Initialization can be completed in a few minutes. However, in the following cases, the set- tings have not been recorded and them we systill not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Lexus dealer. ●The initialization mesage s is not displayed on the multi-information display when per- forming initialization. ●After carrying out the initialization procedure, the tire pressure warning light blinks for 1 minute then stays on after driving for 20 minutes. GS350_200t_GS F_OM_OM30E86U_(U)

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders