owners manual Nissan Micra

all ratings: 0 average rating: 5

Black plate (41,1) CHILD RESTRAINT INSTALLATION USING Installation on rear outboard seats ISOFIX GUID-EBA567E6-B179-4045-AE2A-CE4765ED2602 GUID-BCBDE462-22A7-4AF3-BE55-6633F83BDD27Front-facing:GUID-9E14C2E6-2E9C-4731-980B-C45B899B977B WARNING: Be sure to follow the manufacturer’s instructions for the proper use of your child restraint. Follow these . Attach ISOFIX child restraints only at the steps to install a front-facing child restraint on the rear specified locations. For the ISOFIX lower outboard seats using ISOFIX: anchor locations, see “ISOFIX child restraint system” (P.1-17). If a child restraint is not secured properly, your child could be ser- iously injured or killed in an accident. SSS0754A . Donotinstallchildrestraintsthatrequirethe Step 4 useofatoptetherstraptoseatingpositions 4. Shorten the rigid attachment to have the child that do not have a top tether anchor. restraint firmly tightened; press downward *3 . Do not secure a child restraint in the center and rearward 4 firmly in the center of the child * rear seating position using the ISOFIX lower restraint with your knee to compress the vehicle anchors. The child restraint will not be seat cushion and seatback. secured properly. SSS0646A 5. If the child restraint is equipped with a top tether . Inspect the lower anchors by inserting your Steps 1 and 2 strap, route the top tether strap and secure the fingers into the lower anchor area and 1. Position the child restraint on the seat *1 . tether strap to the tether anchor point. (See “Child feeling to make sure there are no obstruc- 2. Secure the child restraint anchor attachments to restraint anchorage” (P.1-18).) tions over the ISOFIX anchors, such as seat the ISOFIX lower anchors *2 . 6. If the child restraint is equipped with other anti- belt webbing or seat cushion material. The 3. The back of the child restraint should be secured rotation devices such as support legs, use them child restraint will not be secured properly if against the vehicle seat back. If necessary, adjustinstead of the top tether strap following the child the ISOFIX anchors are obstructed. or remove the head restraint to obtain the correctrestraint manufacturer’s instructions. . Child restraint anchorages are designed to child restraint fit. (See “Head restraints” (P.1-5).) If withstand only those loads imposed by the head restraint is removed, store it in a secure correctly fitted child restraints. Under no place. Be sure to install the head restraint when circumstance are they to be used for adult the child restraint is removed. If the seating seat belts, harnesses or for attaching other position does not have an adjustable head items or equipment to the vehicle. restraint and it is interfering with the proper child restraint fit, try another seating position or a different child restraint. Safety — seats, seat belts and supplemental restraint system 1-19 Condition: [ Edit: 2013/ 2/ 25Model: K13-A ]

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders