owners manual Jeep Wrangler

owners manual Jeep Wrangler - year of production: 1997 - Jeep Wrangler TJ 2013 owners manual EN

Document: pdf (5.42 MB) 666 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Jeep Wrangler, year of production 1997:

STARTINGANDOPERATING 415 Four-Wheel Drive Models Only Turn the ignition switch to the START position and In 4L mode, this vehicle will start regardless of whetherrelease when the engine starts. If the engine fails to start or not the clutch pedal is pressed to the floor. This featurewithin 10 seconds, turn the ignition switch to the LOCK enhancesoff-roadperformancebyallowingthevehicletoposition, wait 10 to 15 seconds, then repeat the “Normal start whenin4Lwithouthavingtopresstheclutchpedal.Starting” procedure. The “4WD Indicator Light” will illuminate when theTip Start Feature – Automatic Transmission Only transfer case has been shifted into this mode.Turn the ignition switch to the START position and Automatic Transmission – If Equippedrelease it as soon as the starter engages. The starter motor Start the vehicle with the shift lever in the PARK positionwill continue to run, but will automatically disengage 5 (vehicle can also be started in NEUTRAL). Apply theitself when the engine is running. If the engine fails to brake before shifting to any driving range.start, the starter will disengage automatically in 10 sec- onds. If this occurs, turn the ignition switch to the LOCK Normal Starting position, wait 10 to 15 seconds, then repeat the “Normal NOTE: Normal starting of either a cold or a warm Starting” procedure. engine is obtained without pumping or pressing the accelerator pedal.

Download PDF

Click here to download a pdf file with an instruction manual for Jeep Wrangler
year of production from: 1997

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.