owners manual Jeep Grand Cherokee

all ratings: 0 average rating: 5

Front Fog Lamps 4. Align the index tabs of the front fog lamp3. Grasp the tail lamp and pull firmly rearward 1. Reach through the cutout in the splashbulb with the slots in the collar of the bulbto disengage the lamp from the aperture shield and disconnect the wiring harnessopening on the back of the front fog lamppanel. from the fog lamp connector. housing. 2. Firmly grasp the bulb by the two latches and5. Insert the bulb into the housing until the squeeze them together to unlock the bulbindex tabs are engaged in the slots of the from the back of the front fog lamp housing.collar. 3. Pull the bulb straight out from the keyed6. Firmly and evenly push the bulb straight into opening in the housing. the lamp housing until both tabs snap firmly into place and are fully engaged. CAUTION! 7. Connect the wiring harness to the front fog •Do not touch the new bulb with your fin-lamp connector. Tail Lamp Push Pins gers.OilcontaminationwillseverelyRear Tail, Stop, and Turn Signal shorten bulb life. If the bulb comes inLamps 4. Twist socket counter clockwise and remove contact with any oily surface, clean the from lamp. bulb with rubbing alcohol. 1. Raise the liftgate. •Always use the correct bulb size and type2. Removethetwopush-pinsfromthetaillamp for replacement. An incorrect bulb size orhousing. type may overheat and cause damage to the lamp, the socket or the lamp wiring. 412

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders