owners manual Subaru Outback

all ratings: 0 average rating: 5

Starting and operating/Parking your vehicle7-43 prevent the vehicle from moving shifted into the “P” position,light” F3-19. and contact your SUBARU deal- you must release shift lock.NOTE er. Refer to “Shift lock function” . If the electronic parking brake isF7-27. . If the parking brake switch is operated when the brake is over-– Use tire stops under the tirespressed with the ignition switch in the heated or the vehicle is on a to prevent the vehicle from“ACC” or “LOCK”/“OFF” position, the steep slope, the brake system moving. parking brake is not released. warning light may flash. In this . If the parking brake switch is . Never drive while the parkingpressed without depressing the brake case, the vehicle may start tobrake is applied because this willpedal (all models) and/or clutch pedal move and it may lead to an cause unnecessary wear on the(MT models), the parking brake is not accident. Always use the tire brake linings. Before starting toreleased. stops. drive, always make sure that the. Theelectronicparkingbrakesystem parking brake has been releaseduses motors to apply the parking CAUTION and the brake system warningbrake. Therefore, operating sounds light has turned off. from the motors will be heard when . When the electronic parking applying or releasing the parking brake system has a malfunctionYourvehicleis equippedwith anelectronicbrake. Make sure that the motor and the parking brake cannot beparking brake. You can apply/release thesounds are heard when applying or applied, contact your SUBARUparking brake by operating the parkingreleasing the parking brake. dealer immediately for an inspec-brake switch. . When the electronic parking brake tion. If you have to park yourTo apply: Depress the brake pedal andsystem has a malfunction or the elec- vehicle in such conditions, per-pull up the parking brake switch.tronic parking brake operation is pro- form the following procedure.To release:Press the parking brake hibitedtemporarily, if the parking brake – Stop your vehicle in a flatswitch firmly while the ignition switch isswitch is operated, a chirp sound is location. in the “ON” position and the brake pedal isheard and the brake system warning depressed. light flashes. – Shift the shift lever in the “1” . When you cannot release the park- or reverse position (MT mod-When the parking brake is applied whileing brake due to, for example, a system els). the ignition switch is in the “ON” position,malfunction, contact your SUBARU – Shifttheselectleverinthe“P”the brake system warning light and thedealer and have your SUBARU dealer position (CVT models). Whenindicator light on the parking brake switchrelease the parking brake. the select lever cannot beilluminate. Refer to “Brake system warning. If the operation of the electronic – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders