owners manual Jeep Commander

owners manual Jeep Commander - year of production: 2006, 2007, 2008, 2009, 2010 - Jeep Commander owners manual XK XH EN

Document: pdf (7.46 MB) 460 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Jeep Commander, year of production 2006 - 2010:

404 MAINTAINING YOUR VEHICLE 2. Reach into the front wheel house ahead of the front5. Turn the socket on the back of the housing 1/4 turn wheeltounsnapandliftthecoverovertheaccessholein counterclockwise to unlock it. the front of the wheel house splash shield. Access to the6. Pull the socket and bulb straight out from the opening bulb can be gained through the wheel liner hole.in the housing. 7. Pull the base of the bulb straight out of the socket. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulbcomesincontactwithanyoilysurface,cleanthe bulb with rubbing alcohol. Rear Tail, Stop, Turn Signal, and Backup Lamps 1. Raise the liftgate. 3. Reach through the access hole to access the back of the2. Remove the two push-pins that secure the rear lamp front fog lamp housing on the back of the front fascia.unit to the side of the liftgate opening. 4. Disconnect the electrical connector.

Download PDF

Click here to download a pdf file with an instruction manual for Jeep Commander
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.