Mitsubishi Lancer VIII 8 owners manual page 40

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Lancer, year of production 2007 - 2016:

Seat belts 4.The lap part of the belt must always beWarning display type 1 WARNING worn low and snug across the hips. Pull Be sure the lap belt portion fits snugly and up on the shoulder portion of the belt to take up any slack in the lap belt. is worn as low as possible across the hips, not around the waist. Failure to follow this instruction will increase the risk of serious injury or death in the event of an accident. 4 Be sure the seat belt webbing is not Warning display type 2 twisted when worn. Twisted webbing may adversely affect seat belt performance. 5.To release the belt, press the button on the buckle and allow the belt to retract. If the belt does not retract smoothly, pull it A tone and warning light are used to remind out and check for kinks or twists in the the driver to fasten the seat belt. webbing. Then make sure it remains NOTE untwisted as it retracts. If the ignition switch is set to the “ON” posi- tion without the driver’s seat belt being fas- With the exception of the seat belt for the driver, the seat belts in all other seating posi- tened, a warning light will come on and a Driver’s seat belt tone will sound for approximately 6 seconds tions are equipped with an Automatic Lock- reminder/warning light and to remind you to fasten your seat belt. ing Retractor (ALR) function. If you pull the If you then drive with the seat belt unfastened display seat belt fully out of the retractor, the retrac- for longer than a minute from when the igni- N00418400300 tor will switch to its ALR child restraint installation function (see page 4-19). tion switch was turned on, the warning light Warning light When the ALR function has been activated, will come on and blink repeatedly and the the seat belt will only retract. If this happens, tone will sound intermittently. let the belt fully retract, then pull the seat The warning light and the tone will stop after belt back out, repeating steps 1 through 4. approximately 90 seconds. If you then repeatedly stop and start your vehicle with the seat belt unfastened, the warning light/display and tone will remind you to fasten your seat belt every time the vehicle starts moving. You will also be Seat and restraint systems 4-11

owners manual Mitsubishi Lancer

owners manual Mitsubishi Lancer - year of production: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 - Mitsubishi Lancer VIII 8 owners manual EN