Nissan Cube III 3 owners manual page 40

text version of content this owner's manual page from owners manual to the vehicle Nissan Cube, year of production 2008:

Black plate (38,1) loads imposed by correctly fittedCAUTION Vehicle Safety Standard 213. child restraints. Under no circum- .Check the child restraint in your vehicle to stancesaretheytobeusedforadultRememberthatachildrestraintleftinabe sure it is compatible with the vehicle’s seat belts or harnesses.closed vehicle can become very hot.seat and seat belt system. . Adjustable seatbacks should be Check the seating surface and buckles.If the child restraint is compatible with your positioned to fit the child restraint,before placing your child in the childvehicle, place your child in the child restraint but as upright as possible.restraint. and check the various adjustments to be . After attaching the child restraint, sure the child restraint is compatible with test it before you place the child inThis vehicle is equipped with a universal childyour child. Choose a child restraint that is it. Push it from side to side whilerestraint lower anchor system, referred to as thedesigned for your child’s height and weight. holding the seat near the LATCHLowerAnchorsandTethersforCHildrenSystemAlways follow all recommended procedures. or LATCH. Some child restraints include two attachment or near the seat beltrigid or webbing-mounted attachments that canAll U.S. states and Canadian provinces or path. The child restraint should notbe connected to these lower anchors. For territories require that infants and small movemorethan1inch(25mm)fromdetails, see “Lower Anchors and Tethers forchildren be restrained in an approved child sidetoside.TrytotugitforwardandCHildren System (LATCH) (except for Cargorestraint at all times while the vehicle is check to see if the belt holds theVan models)” later in this section.being operated. Canadian law requires the restraint in place. If the restraint is top tether strap on front-facing child If you do not have a LATCH compatible childrestraints be secured to the designated not secure, tighten the belt asrestraint, the vehicle seat belts can be used.anchor point on the vehicle. necessary, or put the restraint in(See “CHILD RESTRAINT INSTALLATION another seat and test it again. YouUSINGTHESEATBELTS”later in this section.)Lower Anchors and Tethers for CHildren may need to try a different childIn general, child restraints are also designed toSystem (LATCH) (except for Cargo Van restraint. Not all child restraints fitbe installed with a lap/shoulder seat belt.models) in all types of vehicles.Several manufacturers offer child restraints forYour vehicle is equipped with special anchor . When your child restraint is not ininfants and small children of various sizes. Whenpoints that are used with Lower Anchors and use, keep it secured with the LATCHselecting any child restraint, keep the followingTethers for CHildren System (LATCH) compa- system or a seat belt to prevent itpoints in mind:tible child restraints. This system may also be frombeingthrownaroundincaseof.Chooseonlyarestraintwithalabelcertifyingreferred to as the ISOFIX or ISOFIX compatible a sudden stop or accident.that it complies with Federal Motor Vehiclesystem. With this system, you do not have to use Safety Standard 213 or Canadian Motora vehicle seat belt to secure the child restraint. 1-24 Safety — Seats, seat belts and supplemental restraint system Model "Z12-D" EDITED: 2009/ 9/ 17

owners manual Nissan Cube

owners manual Nissan Cube - year of production: 2008 - Nissan Cube III 3 owners manual EN