owners manual Mercedes GL

all ratings: 0 average rating: 5

390 Flat tire Tire pressure not reached If a pressure of 180 kPa (1.8 bar/26 psi) has not been attained after five minutes: XSwitchoff the tire inflation compressor. XUnscrewthefiller hose from the valve of the faulty tire. XVeryslowly drive forwards or reverse approximately 30 ft (10 m). XPumpupthetireagain. After a maximum of five minutes the tire XRemovethecapfromvalveConthefaulty pressuremustbeatleast180kPa(1.8bar/ tire. 26psi). XScrewfiller hose D onto valve C. e GWARNING XInsert connector ? into a 12 V socket in If the required tire pressure is not reached your vehicle. stanc after the specified time, the tire is too badly Observe the notes on sockets damaged. The tire sealant cannot repair the (Y page 352). assi tire in this instance. Damaged tires and a tire n XTurntheSmartKeytoposition1inthe pressure that is too low can significantly ignition lock (Y page 167). impair the vehicle's braking and driving XPresson/offswitch=onthetireinflation characteristics. There is a risk of accident. compressor to I. Donotcontinue driving. Contact a qualified The tire inflation compressor is switched specialist workshop. Breakdowon. The tire is inflated. iFirst,tire sealant is pumped into the tire. Tire pressure reached The pressure can briefly rise to GWARNING approximately 500 kPa (5 bar/73 psi). Donotswitchoffthetireinflation Atire temporarily sealed with tire sealant compressorduringthisphase. impairs the driving characteristics and is not suitable for higher speeds. There is a risk of XAllowthetire inflation compressor to run accident. for five minutes. The tire should then have Youshould therefore adapt your driving style attained a pressure of at least 180 kPa accordinglyanddrivecarefully.Donotexceed (1.8 bar/26 psi). the specified maximum speed with a tire that If a tire pressure of 180 kPa (1.8 bar/26 psi) has been repaired using tire sealant. has been attained after five minutes: (Y page 390). !Residuefromthetiresealantmaycome If a tire pressure of 180 kPa (1.8 bar/26 psi)out of the filler hose after use. This could has not been attained after five minutes:cause stains. (Y page 390). Therefore,placethefillerhoseintheplastic bag which contained the TIREFIT kit. iIftiresealant leaks out, allow it to dry. It can then be removed like a layer of film. H Environmentalnote If your clothes are soiled with tire sealant, Havetheusedtire sealant bottle disposed of havethemcleanedwithperchloroethylene professionally, e.g. at a qualified specialist at a dry cleaner as soon as possible. workshop.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders