owners manual Mercedes E

all ratings: 0 average rating: 5

Service products and filling capacities 388 Only use brake fluid approved by Mercedes- Comply with the important safety precautions Benz according to MB Approval 331.0. for service products when handling coolant (Y page 384). Information abouta pproved brake fluid can be obtained at any qualified specialist The coolant is a mixture of water and workshop or on the Internet at antifreeze/corrosion inhibitor. It performs http://bevo.mercedes-benz.com. the following tasks: R corrosio np rotection i Have the brake fluid regularly replaced at R a qualified specialist workshop and the antifreeze protection replacemen tc onfirmed in the Maintenance R raising the boiling point Booklet. If the coolant has antifreeze protection down to -35 ‡ (-37 †), the boiling point of the coolant during operatio ni s approximately Coolant 266 ‡ (130 †). Important safety notes The antifreeze/corrosion inhibitor concentration in the engine cooling system G WARNING should: If antifreeze comes into contact with hot R be at least 50%. This will protect the engine components in the engine compartment, it cooling system against freezing down to may ignite. There is a risk of fire and injury. approximately -35 ‡ (-37 †). Let the engine cool down before you add R not exceed 55% (antifreeze protection antifreeze. Make sure that antifreeze is not down to -49 ‡ [-45 †]). Otherwise, heat spilled next to the filler neck.T horoughly will not be dissipated as effectively. clean the antifreeze from components before If the vehicle has lost coolant, add equal starting the engine. amounts of water and antifreeze/corrosion inhibitor. ! Only add coolant that has been premixed Mercedes-Benz recommends an antifreeze/ with the desired antifreezep rotection. You corrosion inhibitor concentrate in could otherwise damage the engine. accordance with data Further information on coolants can be Technical MB Specifications for Service Products . 310.1 found in the Mercedes-Benz Specifications for Service Products, MB Specifications for i When the vehicle is first delivered, it is Service Products 310.1, e.g. on the filled with a coolant mixture that ensures Internet at adequate antifreeze and corrosion http://bevo.mercedes-benz.com. Or protection. contact a qualified specialist workshop. i The coolant is checked with every ! Always use a suitable coolant mixture, maintenance interval at a qualified even in countries where high temperatures specialist workshop. prevail. Otherwise, the engine cooling system is not sufficiently protected from corrosion and overheating. i Have the coolant regularly replaced at a qualified specialist workshop and the replacement confirmed in the Maintenance Booklet.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders