owners manual Nissan Juke

all ratings: 0 average rating: 5

Black plate (37,1) properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 4. SSS0650 SSS0100 Rear-facing — step 4 4. After attaching the child restraint, test it REAR-FACING CHILD RESTRAINT IN- before you place the child in it. Push it from STALLATION USING THE SEAT BELTS side to side while holding the child restraint near the LATCH attachment path. The child WARNING restraint should not move more than 1 inch (25 mm), from side to side. Try to tug it The three-point seat belt with Auto- forward and check to see if the LATCH attachment holds the restraint in place. If the matic Locking Retractor (ALR) must be restraint is not secure, tighten the LATCH used when installing a child restraint. attachment as necessary, or put the restraint Failure to use the ALR mode will result in another seat and test it again. You may in the child restraint not being properly need to try a different child restraint or try secured. The restraint could tip over or installing by using the vehicle seat belt (if belooseandcauseinjurytoachildina applicable). Not all child restraints fit in all sudden stop or collision. Also, it can types of vehicles. change the operation of the front 5. Check to make sure the child restraint is passenger air bag. See “Front passen- Safety — Seats, seat belts and supplemental restraint system 1-23 Model "F15-D" EDITED: 2010/ 6/ 24

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders