owners manual Hyundai i30N

all ratings: 0 average rating: 5

Distributing the sealant Checking the tire inflation pressure 1. After driving approximately 7~10 km (4~6 miles or about 10 min), stop at a safety location. W h at to do in an emer OPDEN067015 OLMF064106 3. Connect the other end of the filling hose (3) directly into the tire valve. 9. Immediately drive approximately g ency 4. Plug the compressor power cord 7~10 km (4~6 miles or, about (4) into the vehicle power outlet. 10min) to evenly distribute the sealant in the tire. OAEPH067041 5. Adjust the tire inflation pressure to6 Do not exceed a speed of 80 km/h the recomended tire inflation. 2. Connect the filling hose (3) direct- (50 mph). If possible, do not fall With the ignition swithched on, ly into the compressor. proceed as follows. below a speed of 20 km/h (12 mph). While driving, if you experience any - To increase the inflation pres- unusual vibration, ride disturbance or sure : Switch on the compressor. noise, reduce your speed and drive To check the current inflation with caution until you can safely pull pressure setting, briefly switch off off of the side of the road. the compressor. Call for road side service or towing. - To reduce the inflation pres- sure:Press the button (9) on the compressor. 6-35

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders