owners manual Subaru Outback

owners manual Subaru Outback - year of production: 2009, 2010, 2011, 2012, 2013, 2014 - Subaru Outback Legacy IV 4 owners manual EN

Document: pdf (18.3 MB) 474 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Subaru Outback, year of production 2009 - 2014:

Maintenance and service 11-15 ModelOil filterPartAmount of color number rotation Black15208AA1001 rotation 2.5 L modelsBlue15208AA12A 7/8 rotation 3.6 LBlack15208AA031 3/4 models rotation CAUTION . Never over tighten the oil filter because that can result in an oil 2.5 L non-turbo models 3.6 L models leak. 6. Remove the oil filter with an oil filter. Thoroughly wipe off any engine wrench. oil that has spilled over the 7. Beforeinstalling a new oil filter, apply aexhaust pipe and/or under-cover. thin coat of engine oil to the seal.If left unremoved, the oil could 8. Clean the rubber seal seating area ofcatch fire. the bottom of engine and install the oil filter by hand turning. Be careful not to10.Reinstall the cover under the oil filter. twist or damage the seal. 11. Pour engine oil through the filler neck. 9. Tighten the oil filter by the amountFor the oil capacity (guideline), refer to indicated in the following table after the“Engine oil” F12-4. The necessary quan- seal makes contact with the bottom oftity of oil depends on the quantity of oil that engine. has been drained. The quantity of drained 2.5 L turbo models oil differs slightly depending on the tem- perature of the oil and the time the oil is left flowing out. After refilling the engine with oil, therefore, you must use the level gauge to confirm that the level is correct. – CONTINUED –

Download PDF

Click here to download a pdf file with an instruction manual for Subaru Outback
year of production from: 2009

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.