or
owners manual KIA Rio
owners manual KIA Rio - year of production: 2011 - KIA Rio Pride UB owners manual EN
Document:
pdf (9.95 MB) 447 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle KIA Rio, year of production 2011:
Maintenance
Temperature -A, B & C Tire terminology and definitions Cold Tire Pressure: The amount of
air pressure in a tire, measured in
Air Pressure:The amount of air
The temperature grades are A (the pounds per square inch (psi) or kilo-
inside the tire pressing outward on
highest), B and C representing the pascals (kPa) before a tire has built
the tire. Air pressure is expressed in
tire’s resistance to the generation of up heat from driving.
pounds per square inch (psi) or kilo-
heat and its ability to dissipate heat
pascal (kPa).
when tested under controlled condi- Curb Weight:This means the weight
tions on a specified indoor laboratoryAccessory Weight: This means theof a motor vehicle with standard and
test wheel. optional equipment including the
combined weight of optional acces-
maximum capacity of fuel, oil and
sories. Some examples of optional
Sustained high temperature can coolant, but without passengers and
accessories are, automatic
cause the material of the tire to
cargo.
transaxle, power seats, and air con-
degenerate and reduce tire life, and
ditioning.
excessive temperature can lead to DOT Markings: A code molded into
sudden tire failure. The grade C cor- the sidewall of a tire signifying that
Aspect Ratio: The relationship of a
responds to a level of performance the tire is in compliance with the U.S.
tire's height to its width.
which all passenger car tires must Department of Transportation motor
Belt: A rubber coated layer of cords
meet under the Federal Motor vehicle safety standards.The DOT
that is located between the plies and
Vehicle Safety Standard No. 109. code includes the Tire Identification
the tread. Cords may be made from
Grades B and A represent higher
steel or other reinforcing materials.Number (TIN), an alphanumeric des-
levels of performance on the labora- ignator which can also identify the
Bead: The tire bead contains steel
tory test wheel than the minimum
tire manufacturer, production plant,
required by law. wires wrapped by steel cords that
hold the tire onto the rim.brand and date of production.
GVWR:Gross Vehicle Weight Rating
Bias Ply Tire: A pneumatic tire in
GAWR FRT: Gross Axle Weight
which the plies are laid at alternate
Rating for the Front Axle.
angles less than 90 degrees to the
centerline of the tread.GAWR RR: Gross Axle Weight
Rating for the Rear axle.
751
Download PDF
Click here to download a pdf file with an instruction manual for KIA Rio
year of production from: 2011
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
KIA Rio Pride UB owners manual
pages 379 - 385
KIA Rio Pride UB owners manual
page 382 / 447
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF