Chrysler Neon SRT4 owners manual page 38

text version of content this owner's manual page from owners manual to the vehicle Chrysler Neon SRT4, year of production 2003 - 2005:

38 THINGS TO KNOW BEFORE STARTINGYOUR VEHICLE • The restraint must be appropriate for your child’s• If the belt still can’t be tightened, or if pulling and weight and height. Check the label on the restraint forpushing on the restraint loosens the belt, disconnect weight and height limits. the latch plate from the buckle, turn the buckle • Carefully follow the instructions that come with thearound, and insert the latch plate into the buckle restraint. If you install the restraint improperly, it mayagain. If you still can’t make the child restraint secure, not work when you need it. try a different seating position. Thepassengerseatbeltsareequippedwithcinchinglatch• Buckle the child into the seat according to the child plates which are designed to keep the lap portion tightrestraint manufacturer’s directions. aroundthechildrestraintsothatitisnotnecessarytouse• Whenyourchildrestraint is not in use, secure it in the a locking clip. Pulling up on the shoulder portion of thevehicle with the seat belt or remove it from the vehicle. lap/shoulderbelt will tighten the belt. The cinching latchDonotleaveitlooseinthevehicle.Inasuddenstopor plate will keep the belt tight, however, any seat beltcollision, it could strike the occupants or seat backs system will loosen with time, so check the belt occasion-and cause serious personal injury. ally and pull it tight if necessary.LATCH—LowerAnchorsandTether for CHildren • In the rear seat, you may have trouble tightening theYour vehicle’s rear seat is equipped with the child lap/shoulder belt on the child restraint because therestraint anchorage system called LATCH, which stands buckle or latch plate is too close to the belt pathfor Lower Anchors and Tether for Children. The LATCH opening on the restraint. Disconnect the latch platesystem provides for the installation of the child restraint from the buckle and twist the short buckle-end beltwithout using the vehicle seat belt. All three rear seating several times to shorten it. Insert the latch plate intopositions have exclusive lower anchorages. These are the buckle with the release button facing out.round bars, located at the rear of the seat cushion where it meets the seat back, and just visible when you lean into

owners manual Chrysler Neon SRT4

owners manual Chrysler Neon SRT4 - year of production: 2003, 2004, 2005 - Chrysler Neon SRT4 owners manual EN