owners manual Hyundai Veloster

all ratings: 0 average rating: 5

Maintenance Waxing Finish damage repair Underbody maintenance Wax the vehicle when water will no Deep scratches or stone chips in theCorrosive materials used for ice and longer bead on the paint. painted surface must be repairedsnow removal and dust control may col- promptly. Exposed metal will quickly rustlect on the underbody. If these materials Always wash and dry the vehicle before and may develop into a major repairare not removed, accelerated rusting can waxing. Use a good quality liquid or paste wax, and follow the manufacturer’sexpense. occur on the underbody parts such as instructions. Wax all metal trim to protect the fuel lines, frame, floor pan and it and to maintain its luster.✽NOTICE exhaust system, even though they have Removing oil, tar, and similar materials been treated with rust protection. If your vehicle is damaged and requires with a spot remover will usually strip the Thoroughly flush the vehicle underbody any metal repairorreplacement, be sureand wheel openings with lukewarm or wax from the finish. Be sure to re-wax the body shop applies anti-corrosion these areas even if the rest of the vehicle cold water once a month, after off-road materials to the parts repaired or does not yet need waxing. replaced. driving and at the end of each winter. Pay special attention to these areas because CAUTION Bright-metal maintenance it is difficult to see all the mud and dirt. It will do more harm than good to wet down • To remove road tar and insects, use a • Wiping dust or dirt off the body the road grime without removing it. The tar remover, not a scraper or other with a dry cloth will scratch the lower edges of the doors, rocker panels, finish. sharp object. and frame members have drain holes • To protect the surfaces of bright-metal • Do not use steel wool, abrasive that should not clog with dirt;trapped parts from corrosion, apply a coating of cleaners, or strong detergents water in these areas can cause rusting. wax or chrome preservative and rub to containing highly alkaline or caustic agents on chrome-plateda high luster. WARNING or anodized aluminum parts.This• During winter weather or in coastal may result in damage to the pro- After washing the vehicle, test the areas, cover the bright metal parts withbrakes while driving slowly to see if tective coating and cause discol- a heavier coating of wax or preserva- oration or paint deterioration. they have been affected by water. If tive. If necessary, coat the parts with braking performance is impaired, non-corrosive petroleum jelly or other protective compound. dry the brakes by applying them lightly while maintaining a slow for- ward speed. 7 88

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders