owners manual Mazda 6

owners manual Mazda 6 - year of production: 2007, 2008, 2009, 2010, 2011, 2012 - Mazda 6 II 2 owners manual EN

Document: pdf (4.83 MB) 464 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mazda 6, year of production 2007 - 2012:

Mazda6_8Z64-EA-08H_Edition1 Page367 Wednesday, June 25 2008 10:5 AM Black plate (367,1) Maintenance and Care OwnerMaintenance 4. While the engine is still idling, pull out3.7-liter engine the dipstick and wipe it clean, and thenThevolumeoffluid changes with put it back. temperature. Fluid must be checked while 5. Check the ATF level. If there is no ATFidling the engine without driving at adhering 5 mm from the end of the normal operating temperature. dipstick, add ATF. CAUTION CAUTION ØLowfluidlevel causes transaxle If there is no ATF adhering to the slippage. Overfilling can cause dipstick even after the engine has foaming, loss of fluid, and been warmed up, do not drive the transaxle malfunction. vehicle. Otherwise, the automatic ØUsespecified fluid (page 10-4). A transaxle could be damaged. nonspecified fluid could result in transaxle malfunction and failure. 6. Shift the shift lever to each range and position, and make sure there is no1. Park on a level surface and set the abnormality. parking brake firmly. 7. Drive the vehicle on city roads for2. Start the engine and depress the brake 5 km (3.1 mile) or more. pedal. 8. Park on a level surface and set the3. Move the shift lever through all ranges, parking brake firmly. then set it at P. 9. Shift the shift lever to the park positionWARNING (P), check the ATF level while the Makesurethebrakepedalisapplied engine is idling, and make sure that thebefore shifting the shift lever: ATFlevel is within the proper level. IfShifting the shift lever without first the ATF level is not within the properdepressing the brake pedal is level, add ATF. dangerous. The vehicle could move Theproper fluid level is marked on thesuddenly and cause an accident. dipstick as follows. 4. With the engine still idling, pull out the Full dipstick, wipe it clean, and put it back. Low 8-25 Form No.8Z64-EA-08H

Download PDF

Click here to download a pdf file with an instruction manual for Mazda 6
year of production from: 2007

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.