owners manual Jeep Grand Cherokee

all ratings: 0 average rating: 5

4. Connect the opposite end of the negative (-)6. Once the engine is started, remove the CAUTION! jumper cable to the remote negative (-) postjumper cables in the reverse sequence: Failure to follow these procedures could re-of the vehicle with the discharged battery. sult in damage to the charging system of theDisconnecting The Jumper Cables booster vehicle or the discharged vehicle.WARNING!1. Disconnect the negative (-) end of the jumper cable from the remote negative (-) NOTE: Donotconnectthejumpercabletothenegativepost of the discharged vehicle. Make sure at all times that unused ends of(-) post of the discharged battery. The resulting jumpercablesarenotcontactingeachotherelectrical spark could cause the battery to ex-2. Disconnect the opposite end of the negative or either vehicle while making connections.plode and could result in personal injury. Only(-) jumper cable from the negative (-) post of Connecting The Jumper Cablesuse the specific ground point, do not use anythe booster battery. 1. Connect the positive (+) end of the jumperother exposed metal parts.3. Disconnectthepositive(+)endofthejumper cable to the remote positive (+) post of the cable from the positive (+) post of the discharged vehicle. 5. Start the engine in the vehicle that has thebooster battery. booster battery, let the engine idle a few4. Disconnect the opposite end of the positive 2. Connect the opposite end of the positive (+)minutes, and then start the engine in the(+) jumper cable from the remote positive (+) jumper cable to the positive (+) post of thevehicle with the discharged battery.post of the discharged vehicle. booster battery. 3. Connect the negative end (-) of the jumperCAUTION!5. Reinstall the protective cover over the re- cable to the negative (-) post of the boosterDonotrunthebooster vehicle engine abovemote positive (+) post of the discharged battery. 2000 rpm since it provides no charging ben-vehicle. efit, wastes fuel and can damage boosterIf frequent jump-starting is required to start your vehicle engine. vehicle you should have the battery and charg- ing system tested at your authorized dealer. 361

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders