owners manual Infiniti Q50

owners manual Infiniti Q50 - year of production: 2013 - Infiniti Q50 owners manual EN

Document: pdf (2.09 MB) 386 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Infiniti Q50, year of production 2013:

INSTALLING FRONT LICENSE PLATE Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. Only use the recommended mounting position, otherwise the radar sensor (In- telligent Cruise Control (ICC) system) (if so equipped) obstruction may result. . License plate bracket . J-nut 6 2 . Screw 6 2 . Screw grommet 6 2 1. Park the vehicle on flat, level ground. A 2. Locate the center position as * illustrated. Position the license plate bracket at a distance of approximately 1.26 in (32 mm) B from the bottom of * the bumper. Hold the license plate bracket in place. 3. Mark the center of the hole C with a * felt-tip pen. JVT0222X 4. Carefully drill two pilot holes using a 0.35 in (9 mm) drill bit at the marked locations. (Be sure that the drill only goes through the bumper fascia.) 9-14 Technical and consumer information

Download PDF

Click here to download a pdf file with an instruction manual for Infiniti Q50
year of production from: 2013

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.