Mitsubishi Outlander PHEV III 3 owners manual page 362

text version of content this owner's manual page from owners manual to the vehicle Mitsubishi Outlander PHEV, year of production 2012:

B０0203201E３.book 21 ページ㸰㸮㸯㸱年㸯㸯月㸯９日　火曜日　午前㸯㸯時５㸮分 Replacement of lamp bulbs NOTE Replacement of lamp bulbs zIf any system does not function but the fuse E01003101805 corresponding to that system is normal, thereBefore replacing a bulb, ensure the lamp is may be a fault in the system elsewhere. We off. Do not touch the glass part of the new recommend you to have your vehicle bulb with your bare fingers; the skin oil left checked. on the glass will evaporate when the bulb gets 4.Insert a new fuse of the same capacity by hot and the vapour will condense on the using the fuse puller into the same place reflector and dim the surface. in the fuse block. CAUTION zBulbs are extremely hot immediately after NOTE being turned off. zIf you are unsure of how to carry out the When replacing a bulb, wait for it to cool work as required, we recommend you to con- sufficiently before touching it. You could sult a specialist. otherwise be burnt. zBe careful not to scratch the vehicle body zHandle halogen lamp bulb with care. The gas when removing a lamp or lens. inside a halogen lampb ulb is highly pressur- zWhen it rains, or when the vehicle has been ized, so dropping, knocking, or scratching a washed, the inside of the lens sometimes11 halogen lamp bulb can cause it to shatter. becomes foggy. This is the same phenome- zNever hold the halogen lamp bulb with a non as when window glass mists up on a bare hand, dirty glove, etc. humid day, and does not indicate a functional CAUTION The oil from your hand could cause the bulb problem. zIf the newly inserted fuse blows again after a to break the next time the headlamps are When the lamp is switched on, the heat will short time, we recommend you to have the operated. remove the fog. However, if water gathers electrical system checked to find the cause If the glass surface is dirty, it must beinside the lamp, we recommend you to have and rectify it. cleaned with alcohol, paint thinner, etc., and the lamp checked. refit it after drying thoroughly. zNever use a fuse with a larger capacity than specified or a substitute (such as a cable or foil). Doing so could cause the circuit wires to overheat and create a fire. Maintenance 11-21

owners manual Mitsubishi Outlander PHEV

owners manual Mitsubishi Outlander PHEV - year of production: 2012 - Mitsubishi Outlander PHEV III 3 owners manual EN