owners manual Jeep Commander

owners manual Jeep Commander - year of production: 2006, 2007, 2008, 2009, 2010 - Jeep Commander owners manual XK XH EN

Document: pdf (7.46 MB) 460 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Jeep Commander, year of production 2006 - 2010:

MAINTAINING YOUR VEHICLE 361 2. Turn the ignition to the ON position, but do not crankb. The MIL will not flash at all and will remain fully or start the engine. illuminated until you turn OFF the ignition or start the 3. If you crank or start the engine, you will have to startengine. This means that your vehicle’s OBD II system this test over. is ready and you can proceed to the I/M station. 4. As soon as you turn your key to the ON position, youIf your OBD II system is not ready, you should see your will see the MILsymbol comeonaspartofanormalbulb authorized dealer or repair facility. If your vehicle was check. recently serviced or had a battery failure or replacement, you may need to do nothing more than drive your 5. Approximately15secondslater,oneoftwothingswillvehicle as you normally would in order for your OBD II happen: system to update. A recheck with the above test routine a. The MIL will flash for about 10 seconds and thenmay then indicate that the system is now ready. return to being fully illuminated until you turn OFFRegardless of whether your vehicle’s OBD II system is 7 the ignition or start the engine. This means that yourready or not, if the MIL is illuminated during normal vehicle’s OBD II system is not ready and you shouldvehicle operation you should have your vehicle serviced not proceed to the I/M station.before going to the I/M station. The I/M station can fail your vehicle because the MIL is on with the engine running.

Download PDF

Click here to download a pdf file with an instruction manual for Jeep Commander
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.