owners manual Hyundai Accent

all ratings: 0 average rating: 5

Maintenance 4.Tire ply composition and material7. Uniform tire quality grading Traction - AA, A, B & C Quality grades can be found where The number of layers or plies of rub- The traction grades, from highest to applicable on the tire sidewall ber-coated fabric in the tire. Tire man- lowest, are AA, A, B and C.Those between tread shoulder and maxi- ufacturers also must indicate the grades represent the tire’s ability to mum section width. stop on wet pavement as measured materials in the tire, which include steel, nylon, polyester, and others.TheFor example:TREAD wear 200 under controlled conditions on speci- letter "R" means radial ply construc- fied government test surfaces of tion; the letter "D" means diagonal orTRACTION AA asphalt and concrete.A tire marked C bias ply construction; and the letter "B"TEMPERATURE Amay have poor traction performance. means belted-bias ply construction. Tread wear WARNING 5. Maximum permissible inflationThe tread wear grade is a compara- pressure tive rating based on the wear rate of The traction grade assigned to the tire when tested under controlled this tire is based on straight- This number is the greatest amount conditions on a specified govern- of air pressure that should be put in ahead braking traction tests, the tire. Do not exceed the maximumment test course. For example, a tireand does not include accelera- graded 150 would wear one-and-a- permissible inflation pressure. Refer tion, cornering, hydroplaning, half times (1½) as well on the gov- to the Tire and Loading Information or peak traction characteristics. ernment course as a tire graded 100. label for recommended inflation pressure. The relative performance of tires depends upon the actual conditions of their use, however, and may 6. Maximum load rating depart significantly from the norm This number indicates the maximumdue to variations in driving habits, load in kilograms and pounds that canservice practices and differences in be carried by the tire. When replacingroad characteristics and climate. the tires on the vehicle, always use aThese grades are molded on the side-walls of passenger vehicle tires. tire that has the same load rating as the factory installed tire.The tires available as standard or optional equipment on your vehicle may vary with respect to grade. 745

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders