Mercedes Benz CLA C117 owners manual page 353

text version of content this owner's manual page from owners manual to the vehicle Mercedes CLA, year of production 2013:

Service products and filling capacities351 Only use brake fluid approved by Mercedes-The coolant is a mixture of water and anti- Benz according to MB Approval 331.0.freeze/corrosion inhibitor. It performs the following tasks: Information about approved brake fluid can be obtained at any qualified specialist work- Rcorrosion protection shop or on the Internet at Rantifreeze protection http://bevo.mercedes-benz.com. Rraising the boiling point iHavethebrakefluidrenewedregularlyat If the coolant has antifreeze protection down a qualified specialist workshop. to-35‡(-37†),theboilingpointofthecool- ant during operation is approximately 266 ‡ (130 †). Coolant Theantifreeze/corrosioninhibitorconcentra- tion in the engine cooling system should: Important safety notes Rbeatleast50%.Thiswillprotecttheengine GWARNING cooling system against freezing down to If antifreezecomesintocontactwithhotcom- approximately -35 ‡ (-37 †). ponents in the engine compartment, it may Rnotexceed55%(antifreeze protection ignite. There is a risk of fire and injury. downto-49‡[-45†]).Otherwise,heat Lettheenginecooldownbeforeyouaddanti- will not be dissipated as effectively. freeze.Makesurethatantifreezeisnotspilled Mercedes-Benz recommends an antifreeze/ next to the filler neck. Thoroughly clean the corrosion inhibitor concentrate in accord- antifreeze from components before starting ancewithMBSpecificationsforServiceProd- the engine. ucts 310.1. !Onlyaddcoolantthathasbeenpremixed Whenthevehicleisfirstdelivered,itisfil- i data with the desired antifreeze protection. Youled with a coolant mixture that ensures could otherwise damage the engine.adequate antifreeze and corrosion protec- tion. Further information on coolants can be foundintheMercedes-BenzSpecifications iThecoolantischeckedwitheverymain- for Service Products, MBSpecificationsfor Technical tenance interval at a qualified specialist Service Products 310.1, e.g. on the Inter- workshop. net at http://bevo.mercedes-benz.com. Orcontactaqualifiedspecialist workshop. Filling capacities !Alwaysuseasuitablecoolantmixture, Model Capacity evenincountrieswherehightemperatures prevail. AMGvehicles Approx. 9.1 US qt Otherwise,theenginecoolingsystemisnot (8.6 l) sufficiently protected from corrosion and All other modelsApprox. 8.2 US qt overheating. (7.8 l) iHavethecoolantregularlyreplaced at a qualified specialist workshop and the iUseantifreeze/corrosion inhibitor replacementconfirmedintheMaintenance according to MB approval 325.0 or 326.0. Booklet. Complywiththeimportantsafetyprecautions for service products when handling coolant (Y page 347). Z

owners manual Mercedes CLA

owners manual Mercedes CLA - year of production: 2013 - Mercedes Benz CLA C117 owners manual EN