or
owners manual Jeep Grand Cherokee
owners manual Jeep Grand Cherokee - year of production: 2013 - Jeep Grand Cherokee WK2 WH2 owners manual EN
Document:
pdf (3.08 MB) 472 pages
all ratings: 0
average rating: 5
text version of content this owner's manual page
from owners manual to the vehicle Jeep Grand Cherokee, year of production 2013:
NOTE: • A flashing NEUTRAL (N) position indica-8. Using a ballpoint pen or similar object, press
Disconnecting your vehicle battery willtor light indicates that shift requirementsand hold the recessed transfer case NEU-
erase radio presets and may affect otherhave not been met.TRAL (N) button (located by the selector
vehicle settings. It may also trigger various• IfthevehicleisequippedwithQuadra-Liftswitch) for one second.
fault codes, causing MIL illumination whenair suspension, the engine should be
the battery is reconnected.started and left running for a minimum of
NOTE: 60 seconds (with all the doors closed) at
least once every 24 hours. This process
• Steps 1 through 4 are requirements thatallows the air suspension to adjust the
must be met before pressing the NEU-vehicle’s ride height to compensate for
TRAL(N)button,andmustcontinuetobetemperature effects.
met until the shift has been completed. IfShifting Out Of NEUTRAL (N)
any of these requirements are not metUse the following procedure to prepare your
before pressing the NEUTRAL (N) buttonvehicle for normal usage.
or are no longer met during the shift, then1. Bring the vehicle to a complete stop, leavingNEUTRAL(N) Switch
the NEUTRAL(N) indicator light will flash
continuously until all requirements areit connected to the tow vehicle.9. WhentheNEUTRAL(N)indicatorlight turns
met or until the NEUTRAL (N) button is2. Firmly apply the parking brake.off, release the NEUTRAL (N) button. After
released. the NEUTRAL(N)buttonhasbeenreleased,
• TheignitionmustbeintheON/RUNmode3. Reconnect the negative battery cable.
for a shift to take place and for the posi-4. Turn the ignition to the LOCK/OFF mode.the transfer case will shift to the position
tion indicator lights to be operable. If the indicated by the selector switch.
ignition is not in the ON/RUN mode, the5. Start the engine.10. Shift the transmission into PARK. Turn the
shift will not take place and no position6. Press and hold the brake pedal.engine OFF.
indicator lights will be on or flashing.7. Shift the transmission into NEUTRAL.11. Release the brake pedal.
344
Download PDF
Click here to download a pdf file with an instruction manual for Jeep Grand Cherokee
year of production from: 2013
Do you prefer pdf format?
Find out how to download
Enter the code to download PDF file:
All pages in one PDF file!
How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.
:
Jeep Grand Cherokee WK2 WH2 owners manual
pages 345 - 351
Jeep Grand Cherokee WK2 WH2 owners manual
page 348 / 472
this site is maintained by advertising - for view instructions, turn off ad blocking in your browser
Download PDF