owners manual Subaru Forester

all ratings: 0 average rating: 5

Consumer information and Reporting safety defects 13-7 asymmetrical tire that has a particu-weighing over 5.1 lbs (2.3 kg) in ex-wear indicators become visible. When lar side that must always face out-cess of those standards items whicha tire’s tread wear indicator becomes ward when mounting on a vehicle. they replace, not previously consid-visible, the tire is worn beyond the ac- Accessory weight ered in curb weight or accessoryceptable limit and must be replaced The combined weight (in excess of weight. immediately. With a tire in this condi- those standard items which may be Vehicle capacity weight tion, driving at even low speeds in wet replaced) of floor mats, leather seatsThe total weight of cargo, luggageweather can cause the vehicle to hy- and cross bars to the extent that theseand occupants that can be added todroplane. Possible resulting loss of items are available as factory-in-the vehicle. vehicle control can lead to an acci- stalled equipment (whether installed Vehicle maximum load on a tire dent. or not). Load on an individual tire that is deter-To maximize the life of each tire and Curb weight mined by distributing to each axle itsensure that the tires wear uniformly, it The weight of a motor vehicle with share of the maximum loaded vehicleis best to rotate the tires every 7,500 standard equipment including theweight and dividing by two. miles (12,500 km). Rotating the tires maximum capacity of fuel, oil, andVehicle normal load on a tire involves switching the front and rear coolant and air conditioning. Load on an individual tire that is deter-tires on the right-hand side of the ve- Maximum loaded vehicle weight mined by distributing to each axle itshicle and similarly switching the front The sum of curb weight, accessory share of the curb weight, accessoryand rear tires on the left-hand side of weight, vehicle capacity weight andweight, and normal occupant weightthe vehicle. (Each tire must be kept on production options weight. and dividing by two. its original side of the vehicle.) Re- Normal occupant weight place any damaged or unevenly worn 150 lbs (68 kg) times the number of Tire care – maintenance and tire at the time of rotation. After tire ro- occupants (3 occupants). safety practices tation, adjust the tire pressures and Occupant distribution Check on a daily basis that the tiresmake sure the wheel nuts are correct- Distribution of occupants in a vehicle,are free from serious damage, nails,ly tightened. A tightening torque spec- 2 in front, 1 in rear seat. and stones. At the same time, checkification and a tightening sequence Production options weight the tires for abnormal wear. specification for the wheel nuts can be The combined weight of those in- Inspect the tire tread regularly andfound “Flat tires” in Chapter 9. stalled regular production optionsreplace the tires before their tread – CONTINUED –

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders