Toyota 4Runner 4 IV N210 owners manual page 34

text version of content this owner's manual page from owners manual to the vehicle Toyota 4Runner, year of production 2003 - 2009:

’04 4Runner_U (L/O 0308) The system will automatically be set after If the battery terminal is disconnectedIf the battery becomes discharged due to 30 seconds. When the system is set, theand then reconnected. the vehicle being unused for a long time, indicator light will start flashing again. If the ignition is hotwired.etc., when the battery is recharged or re- 4. After making sure the indicator light placed, the system will give the alarm. If The indicator light will come on when the starts flashing, you may leave the ve-system is activated. this happens, immediately unlock any of hicle. the side doors or the back door with the Never leave anyone in the vehicle when If the alarm has been activated and thekey or the wireless remote control trans- key is not in the ignition switch, all thmeitter, and the alarm will stop. you set the system, because unlocking side doors and back door will re-lock au- TESTING THE SYSTEM from the inside will activate the system. tomatically. 1. Open all the windows. CANCELING THE SYSTEM After one minute, the alarm will automati- 2. Set the system as described above. The system will cancel under the any of cally stop and the indicator light will starts The side doors and back door should the following conditions: flashing again. be locked with the key or wireless re- Any of the side doors, back door Reactorivating the alarm mote control transmitter. Be sure to hood is opened. Once set, the system automatically resetswait until the indicator light goes off or Any of the side doors or the back doorthe alarm after the alarm stops.starts flashing. is unlocked. The alarm will activate again under the3. Unlock any side door from the inside. The key is inserted into the ignition.same circumstances described inThe system should activate the alarm. The battery terminal is reconnected.“Activating the system”. 4. Stopping the alarm as described above. WHEN THE SYSTEM IS SET Stopping the alarm 5. Repeat this operation for the other Activating the system The alarm will be stopped by the followingdoors and hood. When testing the The system will sound the alarm under these ways: hood, also check that the system is the following conditions: Unlock any of the side doors or theactivated when the battery terminal is back door with the key or wireless re- disconnected and then reconnected. If any of the side doors is unlocked ormote control transmitter.If the system does not work properly, opened without the key or wireless re- Turn the ignition key from the “LOCK” have it checked by your Toyota dealer. mote control transmitter, or if the backto “ON” position. door or hood is forcibly opened. These ways cancel the system at the same time. 34 2004 4RUNNER from Aug. ’03 Prod. (OM35811U)

owners manual Toyota 4Runner

owners manual Toyota 4Runner - year of production: 2003, 2004, 2005, 2006, 2007, 2008, 2009 - Toyota 4Runner 4 IV N210 owners manual EN