Toyota 4Runner 3 III N180 owners manual page 34

text version of content this owner's manual page from owners manual to the vehicle Toyota 4Runner, year of production 1996 - 2002:

—Child restraint system A child restraint system for a small When not using the child restraint system, child or baby must itself be properlyCAUTION keep it secured with the seat belt. This will ! prevent it injuring passengers in the event restrained on the seat with either the of a sudden stop or accident. Never install a rea r-facing child re- lap belt or the lap portion of the lap/ Your vehicle has anchors for securing the shoulder belt. You must carefully con-straint system on the front seat. Intop strap of a child restraint system. The the event of an accident, the force sult the manufacturer’s instructions anchor nuts are welded beneath the sheet of the rapid inflation of the airbag which accompany your child restraint metal to permit installation of an anchor can cause severe injury in a rear- system. bracket for a child restraint system. facing child restraint system is To provide proper restraint, use a child re-installed on the front seat.To install an anchor bracket, use an 8mm X 30 mm X 1.25 mm coarse thread metric Unless it is unavoidable, do not straint system following the manufactur- boalt and a 10 mm (0.4 in.) spacer. Note install a forward-facing child re- er’s instructions about the appropriate that the bolts accompanying many child straint system on the front seat. age and size of the child for the child re- restraint systems are not metric. You can straint system. If you must install a forward-fac- damage the anchor nuts on your vehicle ing child restraint system on the Install the child restraint system correctly if you force bolts with different thread into front seat, move the seat as far following the instructions provided by its the anchor nuts. back as possible. For instructions about how to install the manufacturer of the system. General di- After installing the child restraint rections are also provided under the fol- anchor bracket, see “Top strap anchors lowing illustrations. system, make sure it is secured inand locations”. place following the manufactur- If your child restraint system does not pro- The child restraint system should be er’s instructions. If it is not re- installed on the rear seat. According to ac-strained securely, it can cause in- vide any of the necessary parts, you can cident statistics, the child is safer when purchase the following items from your jury to the child in the event of a properly restrained in the rear seat than insudden stop or accident.Toyota dealer. the front seat. *CRS installation kit (Part No. 04731-22012) —contains 1 bolt, 3 types of spacers and 1 locking clip. *Bolt (Part No. 91511-60830) 37

owners manual Toyota 4Runner

owners manual Toyota 4Runner - year of production: 1996, 1997, 1998, 1999, 2000, 2001, 2002 - Toyota 4Runner 3 III N180 owners manual EN