owners manual Jeep Commander

owners manual Jeep Commander - year of production: 2006, 2007, 2008, 2009, 2010 - Jeep Commander owners manual XK XH EN

Document: pdf (7.46 MB) 460 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Jeep Commander, year of production 2006 - 2010:

STARTINGANDOPERATING 339 2. Turn the ignition key ON, engine off. CAUTION! Transmission damage may occur if the transmission3. Shift the transmission into NEUTRAL. is shifted into PARK with the transfer case in NEU-4. Shift the transfer case out of NEUTRAL. TRALandtheenginerunning.WiththetransfercaseHolddowntheNEUTRAL“pin”switch(withapen,etc.) in NEUTRAL ensure that the engine is OFF prior tofor four seconds until the LED lamp by the switch starts shifting the transmission into PARK (refer to steps 7to blink, indicating shift in progress. The lamp will stop and 8 above). blinking (go out) when shift is complete. The “4WD Shifting Out Of NEUTRAL SYSTEM IN NEUTRAL” message will no longer be 5 Use the following procedure to prepare your vehicle fordisplayed on the EVIC (Electronic Vehicle Information normal usage. Center). Refer to “Electronic Vehicle Information Center (EVIC)” in Section 4 of this manual. 1. Press the brake pedal.

Download PDF

Click here to download a pdf file with an instruction manual for Jeep Commander
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.