owners manual Mercedes E

all ratings: 0 average rating: 5

Towing and tow-starting 336 X Before disconnecting the jumper cables, le tt he engine run for several minutes. X First, remove the jumper cables from earth point A and negative terminal ?, then from positive clamp ; and positive terminal =. Begin each time at the contacts on your own vehicle first. X Close cover : of positive clamp ; after removing the jumper cables. X Have the battery checked at a qualified specialist workshop. i Jump-starting is not considered to be a normal operating condition. i Jumper cables and further information regarding jump-starting can be obtained at any qualified specialist workshop. ! If DISTRONIC PLUS or the HOLD function Towing and tow-starting is activated, the vehicle brakes Important safety notes automatically in certain situations. To prevent damage to the vehicle, deactivate G WARNING DISTRONIC PLUS and the HOLD function in Functions relevant to safety are restricted or the following or other similar situations: no longer available if: R when towing the vehicle R the engine is not running. R in the car wash R the brake system or the power steering is ! Only secure the tow rope or tow bar at the malfunctioning. towing eyes. Otherwise, the vehicle could R there is a malfunction in the voltage supply be damaged. ance or the vehicle's electrical system. assist own Breakd If your vehicle is being towed, much more ! Do not use the towing eye for recovery, force may be necessary to steer or brake. this could damage the vehicle. If in doubt, There is a risk of an accident. recover the vehicle with ac rane. In such cases, use a tow bar. Before towing, ! When towing, pull away slowly and make sure that the steering moves freely. smoothly .Ift he tractive power is too high, the vehicles could be damaged. G WARNING ! Do not tow with sling-type equipment. If the weight of the vehicle to be towed or tow- This could damage the vehicle. started is greater than the permissible gross weight of your vehicle: ! On vehicles with KEYLESS-GO, use the SmartKey instead of the Start/Stop R the towing eye could detach itself button. Turn the SmartKey to position 2 in R the vehicle/trailer combination could the ignition lock and shift the automatic rollover. transmission to N. Then, turn the SmartKey There is a risk of an accident. back to 0 and leave it in the ignition lock. When towing or tow-starting another vehicle, ! The vehicle can be towed a maximum of its weight should not be greater than the 30 miles (50km). The towing speed of permissible gross weight of your vehicle. 30 mph (50 km/h) must not be exceeded. Information on your vehicle's gross vehicle If the vehicle has to be towed more than weight rating can be found on the vehicle 30 miles (5 0km), the entire vehicle must be identification plate (Y page 382). raised and transported.

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders