Infiniti Q50 Hybrid owners manual page 337

text version of content this owner's manual page from owners manual to the vehicle Infiniti Q50 Hybrid, year of production 2013:

Engine oil and filter engine. Failure to do so could lead to engineSee “Capacities and recommended 1. Place a large drain pan under the draindamage. fuel/lubricants” (P.9-2) for drain and plug. refill capacity. The drain and refill 2. Remove the oil filler cap. 6. Coat the gasket on the new filter withcapacity depends on the oil tempera- clean engine oil. ture and drain time. Use these specifi- 3. Remove the drain plug 1 with a cations for reference only. Always use * 7. Screw in the oil filter clockwise until a wrench and completely drain the oil. the dipstick to determine the proper slight resistance is felt, then tightenamount of oil in the engine. CAUTION additionally more than 2/3 turn. 10.Start the engine and check for leakage Oil filter tightening torque: around the drain plug and the oil filter. Be careful not to burn yourself, as the 11 to 15 ft-lb Correct as required. engine oil is hot. (14.7 to 20.5 N·m) 11.Turn the engine off and wait more than 8. Clean and re-install the drain plug with15minutes.Check the oil level with the . Waste oil must be disposed of a new washer. Securely tighten the dipstick. Add engine oil if necessary. properly. drain plug with a wrench. After the operation . Check your local regulations. Drain plug tightening torque: 4. (Perform steps 4 to 7 only when the 22 to 29 ft-lb 1. Install the engine undercover into engine oil filter change is needed.) (29 to 39 N·m) position as the following steps. Loosen the oil filter 2 with an oil filterDo not use excessive force. a. Pull the center of the small plastic * clip out. wrench. Remove the oil filter by turning9. Refill engine with recommended oil and it by hand. install the oil filler cap securely. b. Hold the engine undercover into 5. Wipe the engine oil filter mounting position. surface with a clean rag. c. Insert the clip through the under- CAUTION cover into the hole in the frame, then CAUTION push the center of the clip in to lock The dipstick must be inserted in place to the clip in place. prevent oil spillage from the dipstick holed. Install the other bolts that hold the Be sure to remove any old rubber gasketwhile filling the engine with oil. undercover in place. Be careful not remaining on the mounting surface of the 8-14 Maintenance and do-it-yourself

owners manual Infiniti Q50 Hybrid

owners manual Infiniti Q50 Hybrid - year of production: 2013 - Infiniti Q50 Hybrid owners manual EN