owners manual Nissan Juke

all ratings: 0 average rating: 5

Black plate (333,1) READINESS FOR INSPECTION/ EVENT DATA RECORDERS (EDR) MAINTENANCE(I/M) TEST Avehicle equipped with All-Wheel Drive (AWD)“ready”. This vehicle is equipped with an Event Data should never be tested using a two wheelContact a NISSAN dealer to set “ready condi-Recorder (EDR). The main purpose of an EDR is dynamometer (such as the dynamometers usedtion” or to prepare the vehicle for testing.to record, in certain crash or near crash-like by some states for emissions testing), or similar situations, such as an air bag deployment or equipment. Make sure you inform test facility hitting a road obstacle, data that will assist in personnel that your vehicle is equipped with understanding how a vehicle’s systems per- AWD before it is placed on a dynamometer. formed. The EDR is designed to record data Using the wrong test equipment may result in related to vehicle dynamics and safety systems transmission damage or unexpected vehicle for a short period of time, typically 30 seconds movement which could result in serious vehicle or less. The EDR in this vehicle is designed to damage or personal injury. record such data as: Due to legal requirements in some states/areas . How various systems in your vehicle were or provinces, your vehicle may be required to be operating; in what is called the “ready condition” for an . Whether or not the driver and passenger Inspection/Maintenance (I/M) test of the emis- safety belts were buckled/fastened; sion control system. The vehicle is set to the “ready condition” when . How far (if at all) the driver was depressing itis driven through certain driving patterns. the accelerator and/or brake pedal; and, Usually, the “ready condition” can be obtained . How fast the vehicle was traveling. by ordinary usage of the vehicle. . Sounds are not recorded. If a powertrain system component is repaired or the battery is disconnected, the vehicle may be These data can help provide a better under- reset to a “not ready condition”. Before taking standing of the circumstances in which crashes the I/M test, check the vehicle’s inspection/ and injuries occur. maintenance test readiness condition. Place the NOTE: EDR data are recorded by your vehicle ignition switch in the ON position without only if a nontrivial crash situation occurs; no data starting the engine. If the Malfunction Indicator are recorded by the EDR under normal driving Light (MIL) comes on steady for 20 seconds and conditions and no personal data (e.g. name, then blinks for 10 seconds, the I/M test gender, age and crash location) are recorded. condition is “not ready”. If the MIL does not However, other parties, such as law enforce- blink after 20 seconds, the I/M test condition is Technical and consumer information 9-19 Model "F15-D" EDITED: 2010/ 6/ 24

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders