owners manual Mercedes CL

owners manual Mercedes CL - year of production: 2006 - Mercedes Benz CL C216 2014 owners manual EN

Document: pdf (14.21 MB) 494 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Mercedes CL, year of production 2006:

Driving systems 329 Due to the nature of the system: from the side. When you overtake a vehicle, the warning only occurs if the difference in R warnings may be issued in error when speed is less than 7m ph (12 km/h). driving close to crash barriers or similar The yellow indicator lamp goes out if reverse solid lane borders. gear is engaged. In this event, Active Blind R the warning is canceled when driving for an Spot Assist is no longer active. extended period next to long vehicles, such The brightness of the indicator/warning as trucks. lamps is adjusted automatically according to Two Active Blind Spo tA ssist radar sensors the ambient light. are integrated into the front and rear bumpers respectively. An additional radar sensor is WARNING G located behind the cover in the radiator grill. Active Blind Spot Assist is not active at speeds Make sure that the sensors and areas around below 20 mph (3 0km/h). The indicator lamps them are free of dirt, ice or slush. The rear in the exterior mirrors are yellow. Vehicles in sensors must not be covered, for example by the monitoring range are then not indicated. cycle racks or overhanging cargo. Following Always pay attention to traffic conditions and a severe impact or in the event of damage to parking your surroundings. Otherwise, you may fail to and the bumpers, have the function of the sensors Driving recognize dangers in time, cause an accident checked at a qualified specialist workshop. and injure yourself and others. Blind Spot Assist may otherwise not work properly. Visual and acoustic collision warning If a vehicle is detected in the side monitoring Indicator and warning display range and you switch on the respective turn signals, you will receive a collision warning. You will hear a double warnin gt one and red warning lamp : flashes. If the turn signal remains on, detected vehicles are indicated by the flashing of red warning lamp :.T here are no further warning tones. Course-correcting brake application If Active Blind Spot Assist detects a risk of a lateral collision in the monitoring range, a course-correcting brake application is carried : Yellow indicator lamp/red warning lamp out. This is meant to assist you in avoiding a When Active Blind Spot Assist is activated, collision. indicator lamp : in the exterior mirrors lights The course-correcting brake application is up yellow at speeds of up to 20 mph available in the speed range between (30 km/h). At speeds above 20 mph 20 mph (30 km/h) and 120 mph (200 km/h). (30 km/h), the indicator lamp goes out and If a course-correcting brake application Active Blind Spot Assist is operational. occurs, red warning lamp : flashes in the If a vehicle is detected within the blind spot exterior mirror and the following is shown in monitoring range at speeds above 20 mph the multifunction display, for example: (30 km/h), warning lamp : on the corresponding side lights up red. This warning is always emitted when a vehicle enters the blind spot monitoring range from behind or Z

Download PDF

Click here to download a pdf file with an instruction manual for Mercedes CL
year of production from: 2006

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.