owners manual Volvo XC40

all ratings: 0 average rating: 5

DRIVER SUPPORT imminent then the automatic braking function is || Subfunctions for City Safety 1 - Collision warning The driver is first warned of a potentially immi- deployed - this takes place irrespective of nent collision. whether or not the driver brakes. Braking then City Safety can detect pedestrians, cyclists or takes place with full brake force in order to vehicles that are stationary or moving in the same reduce collision speed, or with limited brake force direction as the car and are ahead. City Safety if it is sufficient to avoid a collision. can also detect pedestrians, cyclists or large ani-In connection with automatic braking the seatbelt mals that are crossing the road in front of the car.tensioner may also be activated. For more infor- In the event of a risk of collision with a pedes- mation see the "Seatbelt tensioner" section. trian, larger animal, cyclist or vehicle (includingIn some situations, the action of Auto-brake may vehicles described in the "City Safety in cross begin with light braking and then progress to full traffic" section), the driver€s attention is alerted bybrake action. 67 means of a visual, acoustic and brake pulse warn- When City Safety has prevented a collision with a Function overview . ing. There is no brake pulse warning at lower Acoustic warning signal in the event of a riskspeeds, sudden driver braking or acceleration. stationary object, the car remains stationary in of collision The brake pulse frequency varies according to anticipation of positive action by the driver. If the Warning signal in the event of a risk of colli-the car€s speed. car has been braked to avoid collision with a sion slower vehicle in front, its speed is reduced to 2 - Brake support match that of the vehicle in front. Distance measurement with the camera and If the risk of collision has increased further after radar unit the collision warning then the brake support is NOTE City Safety carries out three steps in the follow-activated. On cars with manual gearbox, the engine ing order: Brake support reinforces the driver’s braking stops when the Auto-brake function has stop- 1. Collision warning action if the system considers that the braking is ped the car, unless the driver has managed to 2. Brake support not sufficient to avoid a collision. depress the clutch pedal beforehand. 3. Auto Brake 3 - Auto Brake The following text explains what happens during The automatic brake function is activated last. The driver can always interrupt a braking inter- the three steps: If in this situation the driver has not yet started tovention by firmly depressing the accelerator take evasive action and the risk of collision is pedal. 67 NOTE: The illustration is schematic - details may vary depending on car model. 328

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders