owners manual VW Passat

all ratings: 0 average rating: 5

Enabling and disabling displays Use the Settings menu, submenu MFI data (Settings > MFI data) to enable displays you want to be available under the MFI menu in the instrument cluster display. The units in which data is displayed can also be changed ⇒ page 34. Applicable only in Mexico, the AGCC, and South Korea MFI menu (Multi-Function Indicator): Premium version ¤ Please first read and note the introductory information and heed the WARNINGS The MFI menu has two automatic trip memories: 1 – single trip memory and 2 – total trip memory. The number of the memory is shown at the upper right of the display. The trip memories are in addi- tion to the trip odometer, which is displayed in the bottom part of the instrument cluster and controlled using the 0.0 / SET button on the right of the instrument panel ⇒ fig. 11 (7). To display the distance driven on trips 1 and 2, select the Route item in the MFI menu (MFI > Route). Press the OK button (⇒ fig. 15) to toggle between Route 1 and Route 2 (trip 1 and trip 2). Push and hold the OK button to manually reset a trip memory to zero. The memory accumulates and stores information about distance driven and fuel used from the time the ignition was switched on until the time it was 1 Single trip switched off. memory If the ignition stays off for 2 hours or more, stored information is automatical- ly deleted. If the trip is continued within 2 hours after the ignition was switched off, the new values are added. The memory displays and stores the accumulated driving and fuel consump- tion data of any number of single trips up to a total driving time of 99 hours 2 Total trip memory and 59 minutes, and up to a total distance of 9,999 km, depending on the instrument cluster version. If one of the maximum values is exceeded, then the memory is automatically cleared and starts again from 0. Possible MFI menu displays The following displays can be accessed in the MFI menu if enabled under Settings > MFI data. Displays that are not enabled will not appear. Display Function Travel time Driving time in hours (h) and minutes (min) corresponding to trip memories 1 and 2 (toggle). Current fuel consumption in miles per gallon (l/100 km) while driving. Consumption When units are set to miles, dashes appear instead of a number when the --.- l/100 km engine is running and the vehicle is standing still. When units are set to kilometers, the display shows liters consumed per hour when the engine is running and the vehicle is standing still. Average fuel consumption in l/100 km on trips per trip memories 1 and 2 Av. consumption (toggle) is displayed once the vehicle has been driven about 100 m. Until --.- l/100 km then, dashes appear instead of a number. The value displayed is updated every 5 seconds. Estimated distance in km that the vehicle can go with the fuel left in the tank Range the way you are currently driving. Takes account of the current fuel con- sumption, among other things. Route Distance driven in km per trip memories 1 and 2 (toggle).

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders