owners manual Chevrolet Corvette

all ratings: 0 average rating: 5

1. Remove the two engine oil drain plugs from the6. Add 9.9 L (10.5 quarts) of oil to the oil tank. bottom of the engine oil pan. One drain plugSee Capacities and Specifications on page 6-112. drains the external oil tank via the oil transfer supply7. Install the oil fill cap and insert the dipstick, line. The other drain plug drains residual oil fromif removed. the crankcase sump. Allow the oil to drain.8. Start the engine and let it run at idle for at least 2. Once the oil has been drained from the engine,15seconds. This will circulate the fresh engine remove the engine oil filter and allow the oil tooil through the lubrication system. drain. 9. Shut off the engine and check the oil level as 3. Re-install both drain plugs and tighten them todescribed under “Checking Engine Oil (ZO6, ZR1, 25 Y(18lbft). and Grand Sport).” 4. Replace the oil filter and tighten it to 30 Y (22 lb ft). See Maintenance Replacement Parts on page7-11 for the correct filter. 5. Oil is filled through the opening in the top of the external engine oil tank. Remove the oil fill cap. 6-25

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders