owners manual Nissan Altima

all ratings: 0 average rating: 5

Safety chains Trailer lights should comply with federal and/or● Loadthetrailersoapproximately60%ofthe Always use suitable safety chains between yourlocal regulations. For assistance in hooking uptrailer load is in the front half and 40% is in vehicle and the trailer. The safety chains shouldtrailer lights, contact a NISSAN dealer or repu-the back half. Also make sure the load is be crossed and should be attached to the hitch,table trailer dealer.balanced side to side. nottothevehiclebumperoraxle.BesuretoleaveTrailer brakes● Check your hitch, trailer tire pressure, ve- enough slack in the chains to permit turningIf your trailer is equipped with a braking system,hicle tire pressure, trailer light operation, and corners. make sure it conforms to federal and/or localtrailer wheel lug nuts every time you attach a Trailer lights regulations and that it is properly installed.trailer to the vehicle. ● Becertain your rearview mirrors conform to CAUTION WARNING all federal, state or local regulations. If not, Never connect a trailer brake system di-install any mirrors required for towing before When splicing into the vehicle electrical driving the vehicle. system, a commercially available power-rectly to the vehicle brake system. type module/converter must be used toPre-towing tips● Determine the overall height of the vehicle provide power for all trailer lighting. This and trailer so the required clearance is unit uses the vehicle battery as a direct● Be certain your vehicle maintains a levelknown. power source for all trailer lights whileposition when a loaded and/or unloadedTrailer towing tips using the vehicle tail light, stoplight andtrailer is hitched. Do not drive the vehicle if it turn signal circuits as a signal source. Thehas an abnormal nose-up or nose-downIn order to gain skill and an understanding of the module/converter must draw no morecondition; check for improper tongue load,vehicle’s behavior, you should practice turning, that 15 milliamps from the stop and tailoverload,wornsuspensionorotherpossiblestopping and backing up in an area which is free lamp circuits. Using a module/convertercauses of either condition.from traffic. Steering stability and braking perfor- that exceeds these power requirements mance will be somewhat different than under may damage the vehicle’s electrical sys-● Alwayssecureitems in the trailer to preventnormal driving conditions. tem. See a reputable trailer dealer to ob-load shift while driving.● Alwayssecureitems in the trailer to prevent tain the proper equipment and to have it load shift while driving. installed. ● Keep the cargo load as low as possible in the trailer to keep the trailer center of gravity● Lock the trailer hitch coupler with a pin or low. lock to prevent the coupler from inadvert- ently becoming unlatched. 9-20 Technical and consumer information ZREVIEWCOPY—2007Altima (alt) Owners Manual—USA_English (nna) 10/27/06—debbieX

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.

---

:

How many PDF files you want to download:
1 PDF file $4,00 USD 3 PDF files $8,00 USD 5 PDF files $12,00 USD

- I agree to the terms of service

Site map |
Privacy |
DMCA |
Terms of service
contact e-mail: contact @ man4car.com
All marks are the property of their respective holders