owners manual Hyundai i20

owners manual Hyundai i20 - year of production: 2008, 2009, 2010, 2011, 2012, 2013, 2014 - Hyundai i20 I 1 owners manual EN

Document: pdf (2.82 MB) 369 pages

all ratings: 0 average rating: 5

text version of content this owner's manual page from owners manual to the vehicle Hyundai i20, year of production 2008 - 2014:

Maintenance G201005AUN G201007AEN WARNING - Tire age 5. Maximum permissible inflation 7. Uniform tire quality grading pressure Quality grades can be found where Tires degrade over time, even applicable on the tire sidewall This number is the greatest amount when they are not being used. between tread shoulder and maxi- of air pressure that should be put in Regardless of the remaining the tire. Do not exceed the maximummum section width. tread, we recommend that tires permissible inflation pressure. ReferFor example: generally be replaced after six to the Tire and Loading Information (6) years of normal service. TREADWEAR 200 label for recommended inflation Heat caused by not climates or TRACTION AA pressure. frequent high loading condi- tions can accelerate the aging TEMPERATURE A process. Failure to follow this G201006AUN Tread wear Warning can result in sudden 6. Maximum load rating The tread wear grade is a compara- tire failure, which could lead to This number indicates the maximum tive rating based on the wear rate of a loss of control and an acci- load in kilograms and pounds that dent involving serious injury or the tire when tested under controlled can be carried by the tire. When death. conditions on a specified govern- replacing the tires on the vehicle, ment test course. For example, a tire always use a tire that has the same graded 150 would wear one-and-a- G201004AEN load rating as the factory installed tire. half times (1½) as well on the gov- 4. Tire ply composition and material ernment course as a tire graded 100. The number of layers or plies of rub- The relative performance of tires ber-coated fabric are in the tire. Tire depends upon the actual conditions manufacturers also must indicate the of their use, however, and may materials in the tire, which include steel, nylon, polyester, and others. depart significantly from the norm The letter "R" means radial ply con- due to variations in driving habits, struction; the letter "D" means diago- service practices and differences in nal or bias ply construction; and the road characteristics and climate. letter "B" means belted-bias ply con- struction. 757

Download PDF

Click here to download a pdf file with an instruction manual for Hyundai i20
year of production from: 2008

Do you prefer pdf format?
Find out how to download

Enter the code to download PDF file:

All pages in one PDF file!

How to get the code?
It's very simple! Just pay through a secure PayPal payment.
It will take no longer than a few minutes.
You will receive the code immediately after payment.
The code will be displayed on the screen and will be sent to you by e-mail address.